{"title":"Primers","description":"","products":[{"product_id":"rocatex-ultimate-grip-primer-5kg","title":"ROCATEX ULTIMATE GRIP PRIMER - 5KG","description":"\u003ch3\u003eRocatex Ultimate Grip Primer - 5kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eA solvent-free, rapid drying one-coat bonding primer.\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMulti-purpose and easy to use\u003c\/li\u003e \u003cli\u003eHigh bond strength with textured key-coat finish\u003c\/li\u003e \u003cli\u003eRapid drying, single coat application\u003c\/li\u003e \u003cli\u003eVery low emissions - EC1 Plus (VOC)\u003c\/li\u003e \u003cli\u003eSuitable for absorbent and non-absorbent surfaces\u003c\/li\u003e \u003cli\u003eCompatible with existing tiles, asphalt, and bitumen\u003c\/li\u003e \u003cli\u003eSuitable for concrete, blockwork, screeds, and timber\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX Ultimate Grip Primer is a solvent-free, rapid drying bonding primer formulated with adhesion-enhancing additives.\u003c\/p\u003e \u003cp\u003eDesigned to bond to difficult non-absorbent surfaces, its textured finish promotes excellent adhesion for tiling, levelling, screeding, and rendering applications.\u003c\/p\u003e \u003cp\u003eSuitable for use on a wide range of absorbent and non-absorbent substrates including:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eExisting tiles\u003c\/li\u003e \u003cli\u003eAsphalt and bitumen\u003c\/li\u003e \u003cli\u003eMetal and glass\u003c\/li\u003e \u003cli\u003eMoisture-resistant chipboard\u003c\/li\u003e \u003cli\u003eGypsum and lime plaster\u003c\/li\u003e \u003cli\u003ePlasterboards\u003c\/li\u003e \u003cli\u003eConcrete and screeds\u003c\/li\u003e \u003cli\u003eAnhydrite screeds\u003c\/li\u003e \u003cli\u003eLevelling compounds\u003c\/li\u003e \u003cli\u003eCement renders\u003c\/li\u003e \u003cli\u003ePlywood and floorboards\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eSubstrate Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, sound, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eResidual moisture content should not exceed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCement: 2%\u003c\/li\u003e \u003cli\u003eAnhydrite: 0.5%\u003c\/li\u003e \u003cli\u003eHeated anhydrite: 0.3%\u003c\/li\u003e \u003cli\u003eGypsum plaster: 1%\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eStir thoroughly before use.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUse undiluted on non-absorbent surfaces\u003c\/li\u003e \u003cli\u003eDilute 1:1 with clean water on absorbent surfaces\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eApply evenly using a roller, brush, or sponge.\u003c\/p\u003e \u003cp\u003eOnly apply a thin coat. Over-application may cause skinning.\u003c\/p\u003e \u003cp\u003eDo not apply below 5°C or above 25°C.\u003c\/p\u003e \u003cp\u003eAnhydrite screeds require two diluted coats.\u003c\/p\u003e \u003cp\u003eOn non-absorbent surfaces and anhydrite screeds, allow the primer to dry fully before further work. Typical drying time is 15–60 minutes depending on conditions.\u003c\/p\u003e \u003cp\u003eOn absorbent surfaces, levelling and tiling may begin while the diluted primer remains wet.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Specific Guidance\u003c\/h3\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat.\u003c\/p\u003e \u003ch4\u003eMetal\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat.\u003c\/p\u003e \u003ch4\u003eFlooring Grade Asphalt \/ Bitumen\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and apply 1 neat coat.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat to all exposed edges, joints, and surfaces.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and apply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat. Allow approximately 6 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface, vacuum clean, then apply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat. Allow approximately 3 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eRemove laitance, vacuum thoroughly, then apply 2 diluted coats.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming before tiling is not required if surfaces are clean and sound. For levelling compounds, apply 1 diluted coat.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eApproximately 10m² per kg depending on substrate absorbency and surface condition.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003cp\u003eShelf life is approximately 12 months from date of manufacture.\u003c\/p\u003e \u003cp\u003eA small amount of liquid separation may occur and can be remixed by stirring.\u003c\/p\u003e \u003cp\u003eIf the container is left open and a skin forms, remove the skin before use.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848376000899,"sku":"TLTA-15-2025","price":83.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-15-2025_IMAGE__14808.1655465538.1280.1280.jpg?v=1776783339"},{"product_id":"rocatex-acrylic-primer-5-litre","title":"ROCATEX ACRYLIC PRIMER - 5 LITRE","description":"\u003ch3\u003eRocatex Acrylic Primer - 5 Litre\u003c\/h3\u003e \u003cp\u003eROCATEX Acrylic Primer is a water-based polymer emulsion designed to maximise penetration into substrates and improve surface preparation for tiling and screeding applications.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConcrete and screeds\u003c\/li\u003e \u003cli\u003eAnhydrite and gypsum surfaces\u003c\/li\u003e \u003cli\u003eTimber and plasterboard\u003c\/li\u003e \u003cli\u003eBlockwork and brickwork\u003c\/li\u003e \u003cli\u003eExisting tiles and metal\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSuitable for porous and non-porous substrates including concrete, anhydrite screeds, cement renders, existing tiles, asphalt, chipboard, plywood, and floorboards.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, sound, dry, and free from dust, dirt, grease, oil, laitance, and other contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eMechanical preparation such as scabbling is recommended to create a suitable key. If the substrate has been exposed to chemical contamination, specialist advice should be obtained before proceeding.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eROCATEX Acrylic Primer should be:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDiluted 1:1 with clean water on porous surfaces\u003c\/li\u003e \u003cli\u003eApplied neat on non-porous surfaces and anhydrite screeds\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eHighly absorbent surfaces may require additional coats.\u003c\/p\u003e \u003cp\u003eApply using a soft brush, ensuring all puddles and excess material are brushed out prior to screeding.\u003c\/p\u003e \u003cp\u003eDo not apply below 5°C or above 25°C.\u003c\/p\u003e \u003cp\u003eEnsure the primer is fully dry before further work begins.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Specific Guidance\u003c\/h3\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove surface laitance, vacuum thoroughly, then apply 2–4 neat coats of ROCATEX Acrylic Primer.\u003c\/p\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003cp\u003eAllow approximately 6 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface, vacuum clean, then apply 2 diluted coats.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003cp\u003eAllow approximately 3 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and apply 2 neat coats.\u003c\/p\u003e \u003cp\u003eAllow approximately 4 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003ePrime with ROCATEX Acrylic Primer diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003ePrime with ROCATEX Acrylic Primer diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eApply a neat coat to all exposed edges and joints.\u003c\/p\u003e \u003cp\u003eApply a slurry coat to the surface using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBrush on a thin coat and allow to dry.\u003c\/p\u003e \u003ch4\u003eCement Based Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if the surface is clean and sound.\u003c\/p\u003e \u003cp\u003ePriming is recommended before applying self-levelling compounds.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply a slurry coat using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eApply a thin coat with a brush and allow to dry.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This method cannot be guaranteed on bitumen surfaces.\u003c\/p\u003e \u003ch4\u003eMetal\u003c\/h4\u003e \u003cp\u003eScore the surface to provide a mechanical key.\u003c\/p\u003e \u003cp\u003eEnsure the surface is clean, dry, and free from contaminants.\u003c\/p\u003e \u003cp\u003eApply a slurry coat using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBrush on a thin coat and allow to dry.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eApproximately 10m² per kg depending on substrate absorbency and surface condition.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003cp\u003eShelf life is approximately 18 months from date of manufacture.\u003c\/p\u003e \u003cp\u003eA small amount of liquid separation may occur and can be remixed by stirring.\u003c\/p\u003e \u003cp\u003eIf the container is left open and a skin forms, remove the skin before use.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848376951171,"sku":"TLTA-15-2050","price":65.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-15-2050_IMAGE__27477.1655468226.1280.1280.jpg?v=1776783342"},{"product_id":"rocatex-acrylic-primer-1-litre","title":"ROCATEX ACRYLIC PRIMER - 1 LITRE","description":"\u003ch3\u003eRocatex Acrylic Primer - 1 Litre\u003c\/h3\u003e \u003cp\u003eROCATEX Acrylic Primer is a water-based polymer emulsion designed to maximise penetration into substrates and improve surface preparation for tiling and screeding applications.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConcrete and screeds\u003c\/li\u003e \u003cli\u003eAnhydrite and gypsum surfaces\u003c\/li\u003e \u003cli\u003eTimber and plasterboard\u003c\/li\u003e \u003cli\u003eBlockwork and brickwork\u003c\/li\u003e \u003cli\u003eExisting tiles and metal\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSuitable for porous and non-porous substrates including concrete, anhydrite screeds, cement renders, existing tiles, asphalt, chipboard, plywood, and floorboards.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, sound, dry, and free from dust, dirt, grease, oil, laitance, and other contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eMechanical preparation such as scabbling is recommended to create a suitable key. If the substrate has been exposed to chemical contamination, specialist advice should be obtained before proceeding.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eROCATEX Acrylic Primer should be:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDiluted 1:1 with clean water on porous surfaces\u003c\/li\u003e \u003cli\u003eApplied neat on non-porous surfaces and anhydrite screeds\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eHighly absorbent surfaces may require additional coats.\u003c\/p\u003e \u003cp\u003eApply using a soft brush, ensuring all puddles and excess material are brushed out prior to screeding.\u003c\/p\u003e \u003cp\u003eDo not apply below 5°C or above 25°C.\u003c\/p\u003e \u003cp\u003eEnsure the primer is fully dry before further work begins.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Specific Guidance\u003c\/h3\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove surface laitance, vacuum thoroughly, then apply 2–4 neat coats of ROCATEX Acrylic Primer.\u003c\/p\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003cp\u003eAllow approximately 6 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface, vacuum clean, then apply 2 diluted coats.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003cp\u003eAllow approximately 3 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and apply 2 neat coats.\u003c\/p\u003e \u003cp\u003eAllow approximately 4 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003ePrime with ROCATEX Acrylic Primer diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003ePrime with ROCATEX Acrylic Primer diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eApply a neat coat to all exposed edges and joints.\u003c\/p\u003e \u003cp\u003eApply a slurry coat to the surface using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBrush on a thin coat and allow to dry.\u003c\/p\u003e \u003ch4\u003eCement Based Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if the surface is clean and sound.\u003c\/p\u003e \u003cp\u003ePriming is recommended before applying self-levelling compounds.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply a slurry coat using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eApply a thin coat with a brush and allow to dry.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This method cannot be guaranteed on bitumen surfaces.\u003c\/p\u003e \u003ch4\u003eMetal\u003c\/h4\u003e \u003cp\u003eScore the surface to provide a mechanical key.\u003c\/p\u003e \u003cp\u003eEnsure the surface is clean, dry, and free from contaminants.\u003c\/p\u003e \u003cp\u003eApply a slurry coat using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBrush on a thin coat and allow to dry.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eApproximately 10m² per kg depending on substrate absorbency and surface condition.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003cp\u003eShelf life is approximately 18 months from date of manufacture.\u003c\/p\u003e \u003cp\u003eA small amount of liquid separation may occur and can be remixed by stirring.\u003c\/p\u003e \u003cp\u003eIf the container is left open and a skin forms, remove the skin before use.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848381768067,"sku":"TLTA-15-2010","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-15-2010_IMAGE__67451.1655476432.1280.1280.jpg?v=1776783386"},{"product_id":"kelmore-primemore-grip-primer","title":"Kelmore PrimeMore Grip Primer","description":"\u003cp\u003e\u003cspan\u003eKelmore’s Prime\u003c\/span\u003e\u003cem\u003eMore\u003c\/em\u003e\u003cspan\u003e Grip is a ready to use, one coat, bond promoting primer. Designed to adhere to non-porous internal wall and floor backgrounds, this product dries with a textured, keyed surface enabling strong adhesion of subsequently applied adhesives, and levelling and smoothing compounds. To help achieve total and uniform coverage, Prime\u003c\/span\u003e\u003cem\u003eMore\u003c\/em\u003e\u003cspan\u003e Grip is pigmented green for enhanced visibility during application.\u003c\/span\u003e\u003c\/p\u003e","brand":"Kelmore","offers":[{"title":"1kg","offer_id":57848802443651,"sku":"PRIMEMOREGRIP1","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"5kg","offer_id":57848802476419,"sku":"PRIMEMOREGRIP5","price":40.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/0fa4d60d-48c6-4aef-ae86-05cca4d9123f__53676.1724246429.1280.1280.png?v=1776785299"},{"product_id":"kelmore-primemore-universal-primer-1l","title":"Kelmore PrimeMore Universal Primer (1L)","description":"\u003ch2\u003ePrimeMore Universal\u003c\/h2\u003e \u003ch3\u003eA High Performance Primer for Porous Backgrounds\u003c\/h3\u003e \u003cp\u003eKelmore PrimeMore Universal is a high-performance primer designed for use on porous and absorbent wall and floor surfaces before applying tile adhesives, levelling compounds, or smoothing compounds.\u003c\/p\u003e \u003cp\u003ePrimeMore Universal regulates surface porosity, helping to improve the workability, adhesion, and overall strength of subsequently applied Kelmore products.\u003c\/p\u003e \u003cp\u003eWhen correctly applied, it also enhances the surface finish of levelling and smoothing compounds.\u003c\/p\u003e \u003cp\u003eFor easier and more consistent application, PrimeMore Universal is pigmented blue to help ensure full and even coverage.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior use.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003e \u003ca href=\"https:\/\/kelmore.co.uk\/wp-content\/uploads\/2024\/01\/PrimeMore-Universal.pdf\" target=\"_blank\" rel=\"noopener\"\u003e Technical Data Sheet \u003c\/a\u003e \u003c\/strong\u003e \u003c\/p\u003e \u003cp\u003e \u003cstrong\u003e \u003ca href=\"https:\/\/kelmore.co.uk\/wp-content\/uploads\/2024\/01\/PrimeMore-Universal-SDS.pdf\" target=\"_blank\" rel=\"noopener\"\u003e Health \u0026amp; Safety Data Sheet \u003c\/a\u003e \u003c\/strong\u003e \u003c\/p\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6z65tew\/product_images\/uploaded_images\/moved-b5b05e593730bdba5201ad57fab43296.png\" alt=\"Kelmore PrimeMore Universal\"\u003e \u003c\/p\u003e","brand":"Kelmore","offers":[{"title":"Default Title","offer_id":57848812503427,"sku":"PRIMEMOREUNI","price":11.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/Universal__81951__84766.1734532289.1280.1280.png?v=1776785475"}],"url":"https:\/\/www.tilefixstore.co.uk\/collections\/primers.oembed","provider":"TileFix Store","version":"1.0","type":"link"}