{"title":"Rocatex","description":"","products":[{"product_id":"rocatex-fgs-ultimate-silicone-310ml","title":"ROCATEX FGS ULTIMATE SILICONE - 310ML","description":"\u003cp\u003e\u003cstrong\u003eRocatex FGS Ultimate White Silicone - 310ml\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e100% pure silicone with a premium matt finish.\u003c\/li\u003e \u003cli\u003eAnti-fungal protection against mould, mildew, and bacteria.\u003c\/li\u003e \u003cli\u003eNon-staining formula suitable for natural stone and marble.\u003c\/li\u003e \u003cli\u003eHighly flexible with movement capability up to 50%.\u003c\/li\u003e \u003cli\u003eExcellent adhesion to plastics, tiles, paint, glass, and metals.\u003c\/li\u003e \u003cli\u003eOutstanding UV, weather, and ageing resistance.\u003c\/li\u003e \u003cli\u003eAdvanced low-odour formulation.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eAvailable Colours:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWhite\u003c\/li\u003e \u003cli\u003eJasmine\u003c\/li\u003e \u003cli\u003eLimestone\u003c\/li\u003e \u003cli\u003eBeige\u003c\/li\u003e \u003cli\u003eGrey Beige\u003c\/li\u003e \u003cli\u003eLight Grey\u003c\/li\u003e \u003cli\u003eDark Grey\u003c\/li\u003e \u003cli\u003eAnthracite\u003c\/li\u003e \u003cli\u003eTranslucent\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e Colour-matched Rocatex flexible grouts are also available.\u003c\/p\u003e \u003cp\u003eROCATEX FGS Ultimate Silicone is a low modulus, neutral curing, non-staining, anti-mould silicone sealant and adhesive with a smooth matt finish.\u003c\/p\u003e \u003cp\u003eSuitable for bathrooms, kitchens, wetrooms, tiling, plumbing, sanitary installations, expansion joints, glazing, construction, roofing, natural stone, and marble applications.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSurfaces must be dry, firm, and free from dust, grease, dirt, and contaminants. Porous surfaces should be primed before application.\u003c\/p\u003e \u003cp\u003eApply the sealant firmly into or along the joint.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMinimum indoor joint size: 5 x 5mm\u003c\/li\u003e \u003cli\u003eMinimum outdoor joint size: 10 x 8mm (width x depth)\u003c\/li\u003e \u003cli\u003eFor joints up to 30mm wide, the depth should be approximately half the joint width.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSmooth the sealant using a suitable tool and clean water or a non-staining water-based smoothing agent.\u003c\/p\u003e \u003cp\u003eApproximate working time is 30 minutes (15 minutes for translucent).\u003c\/p\u003e \u003cp\u003eDo not apply below 5°C or above 35°C.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNot Suitable For:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAquarium construction\u003c\/li\u003e \u003cli\u003eMirror adhesive applications\u003c\/li\u003e \u003cli\u003ePermanent underwater use\u003c\/li\u003e \u003cli\u003ePlastics with poor silicone adhesion such as PE, PP, and PET\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eYield:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eApproximate coverage per 310ml cartridge:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e5 x 5mm joint: approximately 12m\u003c\/li\u003e \u003cli\u003e10 x 10mm joint: approximately 3m\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eStore unopened, off the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCuring:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eCuring time depends on temperature, humidity, and joint depth.\u003c\/p\u003e \u003cp\u003eUnder standard conditions (23°C \/ 50% relative humidity), a 10 x 10mm joint typically cures within 8–14 days.\u003c\/p\u003e \u003cp\u003eLow temperatures, low humidity, and deeper joints may significantly slow curing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHealth \u0026amp; Safety:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eContains 2-butanone oxime and may cause an allergic reaction.\u003c\/p\u003e \u003cp\u003eTranslucent versions contain 3-aminopropyl compounds and biocides including Carbendazim and silver.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHarmful if swallowed.\u003c\/li\u003e \u003cli\u003eAvoid contact with skin and eyes.\u003c\/li\u003e \u003cli\u003eIf contact with eyes occurs, rinse immediately with water and seek medical attention.\u003c\/li\u003e \u003cli\u003eUse only in well-ventilated areas.\u003c\/li\u003e \u003cli\u003eDo not inhale vapours.\u003c\/li\u003e \u003cli\u003eKeep out of reach of children.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor further information, please refer to the Material Safety Data Sheet for this product.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Anthracite","offer_id":57848374395267,"sku":"TLTA-35-2024","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Beige","offer_id":57848374428035,"sku":"TLTA-35-2010","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Jasmine","offer_id":57848374460803,"sku":"TLTA-35-2004","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Limestone","offer_id":57848374493571,"sku":"TLTA-35-2008","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Grey beige","offer_id":57848374526339,"sku":"TLTA-35-2012","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Light grey","offer_id":57848374559107,"sku":"TLTA-35-2020","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Dark grey","offer_id":57848374591875,"sku":"TLTA-35-2022","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"Translucent","offer_id":57848374624643,"sku":"TLTA-35-2001","price":18.99,"currency_code":"GBP","in_stock":false},{"title":"White","offer_id":57848374657411,"sku":"TLTA-35-2002","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/FGS_Ultimate_Silicone__16714.1655461591.1280.1280.jpg?v=1776783332"},{"product_id":"rocatex-cg2-wa-ultimate-grout-5kg","title":"ROCATEX CG2 WA ULTIMATE GROUT - 5KG","description":"\u003ch3\u003eRocatex CG2 WA Ultimate Grout - 5kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFibre Reinforced Flexible Anti-Mould Wall \u0026amp; Floor Grout\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAnti-mould technology\u003c\/li\u003e \u003cli\u003eFlexible and fibre reinforced\u003c\/li\u003e \u003cli\u003eHighly water repellent\u003c\/li\u003e \u003cli\u003eAdvanced colour stability\u003c\/li\u003e \u003cli\u003eRapid hardening with excellent durability\u003c\/li\u003e \u003cli\u003eContains over 50% recycled material\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eAvailable Colours\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWhite\u003c\/li\u003e \u003cli\u003eJasmine\u003c\/li\u003e \u003cli\u003eLimestone\u003c\/li\u003e \u003cli\u003eBeige\u003c\/li\u003e \u003cli\u003eGrey Beige\u003c\/li\u003e \u003cli\u003eLight Grey\u003c\/li\u003e \u003cli\u003eDark Grey\u003c\/li\u003e \u003cli\u003eAnthracite\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Colour-matched silicones are available.\u003c\/p\u003e \u003cp\u003eROCATEX CG2 WA Ultimate Grout is a rapid-setting, fibre-reinforced, flexible anti-mould cementitious grout suitable for wall and floor applications.\u003c\/p\u003e \u003cp\u003eDesigned for ceramic tiles, porcelain, mosaics, and natural stone with joint widths between 1–20mm, it is suitable for both domestic and commercial environments.\u003c\/p\u003e \u003cp\u003eAdvanced water-repellent polymers improve colour stability and wear resistance, making the grout suitable for both dry and wet areas, including swimming pools.\u003c\/p\u003e \u003ch3\u003eAreas of Use\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, natural stone, and mosaics\u003c\/li\u003e \u003cli\u003eTimber floors and underfloor heating systems\u003c\/li\u003e \u003cli\u003eSwimming pools and wet areas\u003c\/li\u003e \u003cli\u003eDomestic and commercial applications\u003c\/li\u003e \u003cli\u003eInterior and exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePreparation\u003c\/h3\u003e \u003cp\u003eEnsure tiles are firmly fixed and grout joints are clean, dry, and free from dust, grease, adhesive residue, bedding mortar, and any contaminants.\u003c\/p\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 5kg of ROCATEX CG2 WA Ultimate Grout with approximately 1.6 litres of clean cold water until a smooth, creamy consistency is achieved.\u003c\/p\u003e \u003cp\u003eUse a suitable drill and whisk attachment, mixing slowly for a minimum of 2 minutes to ensure all ingredients are fully dispersed.\u003c\/p\u003e \u003cp\u003eAllow the mixture to stand for 2 minutes, then briefly re-mix before use.\u003c\/p\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply using a grout float or squeegee, working the grout deeply into the joints until fully filled.\u003c\/p\u003e \u003cp\u003eRemove excess grout as work progresses. Remaining residue can typically be cleaned using a damp sponge approximately 20 minutes after application.\u003c\/p\u003e \u003cp\u003eAny dry film can be polished away with a clean dry cloth once the grout has hardened.\u003c\/p\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIf frost is forecast within 24 hours\u003c\/li\u003e \u003cli\u003eIn wet conditions\u003c\/li\u003e \u003cli\u003eBelow 5°C or above 25°C\u003c\/li\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eOnto hot substrates\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePlease Note\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not mix grout batches on the same installation\u003c\/li\u003e \u003cli\u003eDo not exceed the recommended water ratio\u003c\/li\u003e \u003cli\u003eAllow grout to stiffen before washing excess from tiles\u003c\/li\u003e \u003cli\u003eUse minimal water during cleaning\u003c\/li\u003e \u003cli\u003eSome tiles and natural stone may be susceptible to staining — always carry out a test area first\u003c\/li\u003e \u003cli\u003eUse clean tools and materials during application\u003c\/li\u003e \u003cli\u003eAcid-based cleaners may cause grout discolouration or premature wear\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCare \u0026amp; Maintenance\u003c\/h3\u003e \u003cp\u003eTo maintain appearance and durability, grout joints should be sealed using a suitable ROCATEX sealer and regularly cleaned using ROCATEX Tile \u0026amp; Stone Cleaner.\u003c\/p\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eCoverage varies depending on tile size and joint width.\u003c\/p\u003e \u003cp\u003eMaterial requirement can be calculated using the following formula (all measurements in mm):\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e(A + B) × C × D × 1.6 ÷ (A × B) = kg\/m²\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eA\u003c\/strong\u003e = Tile length\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eB\u003c\/strong\u003e = Tile width\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eC\u003c\/strong\u003e = Joint width\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eD\u003c\/strong\u003e = Joint depth\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, off the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the guidance provided on the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause an allergic reaction\u003c\/li\u003e \u003cli\u003eWear suitable gloves, eye protection, and protective clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003cli\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor further information, please refer to the Material Safety Data Sheet for this product.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"White","offer_id":57848374755715,"sku":"TLTA-10-2002","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Anthracite","offer_id":57848374788483,"sku":"TLTA-10-2024","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Beige","offer_id":57848374821251,"sku":"TLTA-10-2010","price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Jasmine","offer_id":57848374854019,"sku":"TLTA-10-2004","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Limestone","offer_id":57848374886787,"sku":"TLTA-10-2008","price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Grey beige","offer_id":57848374919555,"sku":"TLTA-10-2012","price":23.99,"currency_code":"GBP","in_stock":false},{"title":"Light grey","offer_id":57848374952323,"sku":"TLTA-10-2020","price":23.99,"currency_code":"GBP","in_stock":true},{"title":"Dark grey","offer_id":57848374985091,"sku":"TLTA-10-2022","price":23.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/Fibre_Reinforced_Wall_Floor_Grout-_5kg__11795.1655462686.1280.1280.jpg?v=1776783334"},{"product_id":"rocatex-c10-ultimate-sealer-5-litres","title":"ROCATEX C10 ULTIMATE SEALER - 5 LITRES","description":"\u003ch3\u003eRocatex C10 Ultimate Sealer - 5 Litres\u003c\/h3\u003e \u003cp\u003eA high-performance VOC-free water-based impregnating sealer that provides an invisible, durable protective barrier against stains, dirt, mould, and limescale.\u003c\/p\u003e \u003cp\u003eSuitable for polished and unpolished natural stone, grout joints, paving, concrete, brick, and render.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuitable for polished and unpolished natural stone\u003c\/li\u003e \u003cli\u003eIdeal for grout, paving, concrete, brick, and render\u003c\/li\u003e \u003cli\u003eExcellent stain and dirt protection\u003c\/li\u003e \u003cli\u003eHelps protect against mould and limescale\u003c\/li\u003e \u003cli\u003eEasy to apply – only 1 to 2 coats required\u003c\/li\u003e \u003cli\u003eInvisible finish that does not alter appearance\u003c\/li\u003e \u003cli\u003eHighly water repellent long-lasting protection\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eSuitable for domestic and commercial applications\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C10 Ultimate Sealer is an advanced fluorochemical impregnating sealer designed to penetrate porous surfaces while allowing them to breathe.\u003c\/p\u003e \u003cp\u003eIt provides excellent oil, grease, and water repellency while improving stain resistance and ease of cleaning.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eDirections for Use\u003c\/h3\u003e \u003cp\u003eShake well before use.\u003c\/p\u003e \u003cp\u003eEnsure the surface is clean, dry, and free from dirt, grime, cement residues, and grout haze before application.\u003c\/p\u003e \u003cp\u003eIf required, clean surfaces first using a diluted solution of ROCATEX Tile \u0026amp; Stone Renovator (1:10 dilution), rinse thoroughly, and allow to dry completely.\u003c\/p\u003e \u003cp\u003eAny factory-applied sealers or wax coatings on porcelain surfaces must be removed prior to sealing.\u003c\/p\u003e \u003cp\u003eApply generously using a:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eROCATEX Sealer Applicator\u003c\/li\u003e \u003cli\u003eSponge\u003c\/li\u003e \u003cli\u003eBrush\u003c\/li\u003e \u003cli\u003eRoller\u003c\/li\u003e \u003cli\u003ePaint pad\u003c\/li\u003e \u003cli\u003eSpray applicator\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eRemove excess solution after 15–30 minutes.\u003c\/p\u003e \u003cp\u003eA second coat is recommended after 1 hour to ensure complete coverage. Remove excess again after 15–30 minutes.\u003c\/p\u003e \u003cp\u003eSurfaces are typically dry enough to walk on after approximately 1 hour but require up to 72 hours to achieve full resistance.\u003c\/p\u003e \u003cp\u003eDuring curing:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDo not cover the surface\u003c\/li\u003e \u003cli\u003eWipe spills immediately\u003c\/li\u003e \u003cli\u003eEnsure trapped moisture is considered on newly laid floors\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTo test sealing effectiveness, perform a water bead test:\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePlace a teaspoon of water on the sealed surface\u003c\/li\u003e \u003cli\u003eLeave for 15 minutes\u003c\/li\u003e \u003cli\u003eIf absorbed, apply an additional coat\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eAt temperatures above 25°C\u003c\/li\u003e \u003cli\u003eWhile underfloor heating is switched on\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not allow residue to dry on the surface.\u003c\/p\u003e \u003cp\u003eDo not grout until at least 4 hours after sealing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Always test in an inconspicuous area before full application.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003ch4\u003eHigher Porosity Surfaces\u003c\/h4\u003e \u003cp\u003eApproximately 7.5m² per litre per coat\u003c\/p\u003e \u003ch4\u003eLower Porosity Surfaces\u003c\/h4\u003e \u003cp\u003eApproximately 15m² per litre per coat\u003c\/p\u003e \u003ch4\u003ePolished Surfaces\u003c\/h4\u003e \u003cp\u003eApproximately 30m² per litre per coat\u003c\/p\u003e \u003ch4\u003eGrout Joints\u003c\/h4\u003e \u003cp\u003eApproximately 1000 linear metres per litre per coat\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMaintenance\u003c\/h3\u003e \u003cp\u003eRegularly sweep floors and clean surfaces using ROCATEX Tile \u0026amp; Stone Cleaner.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore in a cool, dry, frost-free environment between 5°C and 25°C.\u003c\/p\u003e \u003cp\u003eShelf life is up to 2 years in unopened original containers.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eContains: 2-METHYLISOTHIAZOL-3(2H)-ONE.\u003c\/p\u003e \u003cp\u003eMay cause an allergic skin reaction.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003cli\u003eWear protective gloves, clothing, and eye\/face protection\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIf on skin:\u003c\/strong\u003e Wash thoroughly with soap and water.\u003c\/p\u003e \u003cp\u003eIf irritation or rash occurs, seek medical advice.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848375345539,"sku":"TLTA-20-2006","price":178.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-20-2006_C10_Sealer_IMAGE__77889.1655463071.1280.1280.jpg?v=1776783336"},{"product_id":"rocatex-tile-stone-cleaner-5-litre","title":"ROCATEX TILE \u0026 STONE CLEANER - 5 LITRE","description":"\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eRocatex Tile \u0026amp; Stone Cleaner - 5 Litre\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003eA high quality liquid soap containing a trace of linseed oil especially formulated to clean without damaging the most delicate surfaces.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003eHas a fresh, clean fragrance.\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eNatural Stone \/ Granite\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eTravertine \/ Limestone\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eMarble \/ Polished Stone\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eSandstone \/ Slate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eTerracotta \/ Quarry Tiles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eBrick \/ Paving\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eFloors \/ Worktops\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12pt;\"\u003eInterior \/ Exterior\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003eA high quality liquid soap containing a trace of linseed oil especially formulated to clean without damaging the most delicate surfaces. For use on travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles and flagstones. Has a fresh, clean fragrance. Suitable for use on both sealed and unsealed, polished and unpolished surfaces. Ideal for surfaces that are protected with ROCATEX; Natural Finish, Colour Enhancing, Polished Stone \u0026amp; Porcelain, Satin Finish and Stone \u0026amp; Grout Sealers.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify; margin: 0in 0in .0001pt .5in;\"\u003e \u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eDIRECTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003eDilute 2 or 3 capfuls (5 capfuls on dirtier floors) of ROCATEX Tile \u0026amp; Stone Cleaner in a bucket of warm water. Wash the floor and allow to dry. Does not require rinsing.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify; margin: 0in 0in .0001pt .5in;\"\u003e \u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003eOn waxed or polished surfaces such as porcelain, granite and glass finish by buffing with a dry soft cloth or machine.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify; margin: 0in 0in .0001pt .5in;\"\u003e \u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eCOVERAGE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e1 litre of ROCATEX Tile \u0026amp; Stone Cleaner should be sufficient to wash an average floor of 20m2 approx 40 times.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify; margin: 0in 0in .0001pt .5in;\"\u003e \u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eSTORAGE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003eStore in a cool, dry, frost free environment.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify; margin: 0in 0in .0001pt .5in;\"\u003e \u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eHEALTH \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003eCauses serious eye irritation. Keep out of reach of children. Wash contaminated skin thoroughly after handling. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing until no signs of contamination remain. Get medical advice\/attention.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e \u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003eStore in closed container.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cbr\u003e\u003cspan style=\"font-size: 12pt;\"\u003eDispose of contents\/container in accordance with local regulations.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cbr\u003e\u003cspan style=\"font-size: 12pt;\"\u003eContains: \u0026gt;5% but \u0026lt;15% anionic surfactant, \u0026gt;5% but \u0026lt;15% non-ionic surfactant, perfume.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cbr\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIngredients: www.rocatex.com\/detergents\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e \u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cspan style=\"font-size: 12pt;\"\u003eLabel in accordance with EC no.1272\/2008.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"margin: 0in; margin-bottom: .0001pt; text-align: justify;\"\u003e\u003cbr\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis information is offered without guarantee. The material should be used so as to take account of the\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 12pt;\"\u003elocal conditions and the surfaces to be treated. In case of doubt, the product should be tried out in an\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 12pt;\"\u003einconspicuous area.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848375705987,"sku":"TLTA-20-2036","price":107.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-20-2036_IMAGE__48045.1655464770.1280.1280.jpg?v=1776783337"},{"product_id":"rocatex-ultimate-grip-primer-5kg","title":"ROCATEX ULTIMATE GRIP PRIMER - 5KG","description":"\u003ch3\u003eRocatex Ultimate Grip Primer - 5kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eA solvent-free, rapid drying one-coat bonding primer.\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMulti-purpose and easy to use\u003c\/li\u003e \u003cli\u003eHigh bond strength with textured key-coat finish\u003c\/li\u003e \u003cli\u003eRapid drying, single coat application\u003c\/li\u003e \u003cli\u003eVery low emissions - EC1 Plus (VOC)\u003c\/li\u003e \u003cli\u003eSuitable for absorbent and non-absorbent surfaces\u003c\/li\u003e \u003cli\u003eCompatible with existing tiles, asphalt, and bitumen\u003c\/li\u003e \u003cli\u003eSuitable for concrete, blockwork, screeds, and timber\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX Ultimate Grip Primer is a solvent-free, rapid drying bonding primer formulated with adhesion-enhancing additives.\u003c\/p\u003e \u003cp\u003eDesigned to bond to difficult non-absorbent surfaces, its textured finish promotes excellent adhesion for tiling, levelling, screeding, and rendering applications.\u003c\/p\u003e \u003cp\u003eSuitable for use on a wide range of absorbent and non-absorbent substrates including:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eExisting tiles\u003c\/li\u003e \u003cli\u003eAsphalt and bitumen\u003c\/li\u003e \u003cli\u003eMetal and glass\u003c\/li\u003e \u003cli\u003eMoisture-resistant chipboard\u003c\/li\u003e \u003cli\u003eGypsum and lime plaster\u003c\/li\u003e \u003cli\u003ePlasterboards\u003c\/li\u003e \u003cli\u003eConcrete and screeds\u003c\/li\u003e \u003cli\u003eAnhydrite screeds\u003c\/li\u003e \u003cli\u003eLevelling compounds\u003c\/li\u003e \u003cli\u003eCement renders\u003c\/li\u003e \u003cli\u003ePlywood and floorboards\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eSubstrate Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, sound, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eResidual moisture content should not exceed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCement: 2%\u003c\/li\u003e \u003cli\u003eAnhydrite: 0.5%\u003c\/li\u003e \u003cli\u003eHeated anhydrite: 0.3%\u003c\/li\u003e \u003cli\u003eGypsum plaster: 1%\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eStir thoroughly before use.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUse undiluted on non-absorbent surfaces\u003c\/li\u003e \u003cli\u003eDilute 1:1 with clean water on absorbent surfaces\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eApply evenly using a roller, brush, or sponge.\u003c\/p\u003e \u003cp\u003eOnly apply a thin coat. Over-application may cause skinning.\u003c\/p\u003e \u003cp\u003eDo not apply below 5°C or above 25°C.\u003c\/p\u003e \u003cp\u003eAnhydrite screeds require two diluted coats.\u003c\/p\u003e \u003cp\u003eOn non-absorbent surfaces and anhydrite screeds, allow the primer to dry fully before further work. Typical drying time is 15–60 minutes depending on conditions.\u003c\/p\u003e \u003cp\u003eOn absorbent surfaces, levelling and tiling may begin while the diluted primer remains wet.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Specific Guidance\u003c\/h3\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat.\u003c\/p\u003e \u003ch4\u003eMetal\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat.\u003c\/p\u003e \u003ch4\u003eFlooring Grade Asphalt \/ Bitumen\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and apply 1 neat coat.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat to all exposed edges, joints, and surfaces.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and apply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat. Allow approximately 6 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface, vacuum clean, then apply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat. Allow approximately 3 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eRemove laitance, vacuum thoroughly, then apply 2 diluted coats.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eApply 1 diluted coat.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming before tiling is not required if surfaces are clean and sound. For levelling compounds, apply 1 diluted coat.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eApproximately 10m² per kg depending on substrate absorbency and surface condition.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003cp\u003eShelf life is approximately 12 months from date of manufacture.\u003c\/p\u003e \u003cp\u003eA small amount of liquid separation may occur and can be remixed by stirring.\u003c\/p\u003e \u003cp\u003eIf the container is left open and a skin forms, remove the skin before use.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848376000899,"sku":"TLTA-15-2025","price":83.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-15-2025_IMAGE__14808.1655465538.1280.1280.jpg?v=1776783339"},{"product_id":"rocatex-waterproof-tanking-coat-5kg","title":"ROCATEX WATERPROOF TANKING COAT - 5KG","description":"\u003cp\u003e\u003cstrong\u003eRocatex Waterproof Tanking Coat – 5kg\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eA premium-grade, rapid-drying, highly flexible one-part liquid rubber membrane.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAdvanced liquid rubber technology\u003c\/li\u003e \u003cli\u003e100% waterproof and highly flexible\u003c\/li\u003e \u003cli\u003eRapid drying – ready to tile in just 1 hour\u003c\/li\u003e \u003cli\u003eEasy to apply with no priming required\u003c\/li\u003e \u003cli\u003eExcellent adhesion and compatible with waterproof tapes\u003c\/li\u003e \u003cli\u003eSuitable for interior, exterior, domestic, and commercial applications\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX Waterproof Tanking Coat is a rapid-drying, solvent-free liquid rubber membrane based on an advanced synthetic latex polymer system with excellent waterproofing performance. Once cured, it remains elastic and forms a seamless waterproof barrier.\u003c\/p\u003e \u003cp\u003eSuitable for use on a wide range of construction substrates before tiling, including internal and external walls and floors in showers, wetrooms, bathrooms, steam rooms, balconies, and terraces.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePreparation:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAll surfaces must be sound, dry, clean, and free from dust, grease, or contaminants that may affect adhesion. Any weak areas should be repaired and fully cured before application. Dusty surfaces should be vacuumed and greasy surfaces thoroughly degreased.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWaterproof Boards\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWaterproof tile backer boards, such as ROCATEX Rocaboards, provide an ideal substrate for tiling projects exposed to moisture and water. Rocaboards also offer excellent thermal insulation and are compatible with underfloor heating systems.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGypsum Plasters\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eRoughen the surface using a wire brush or abrasive tool to remove surface laitance. Although not essential, a primer coat can be used to improve adhesion by mixing 1 part ROCATEX Waterproof Tanking Coat with 1 part clean water. Allow to dry fully before application. New plaster should be fully dry before use, which may take approximately 6 weeks.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlasterboards\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSkimming is not required. Ensure boards are dry, securely fixed, and rigid.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWood\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWooden surfaces must provide a rigid and secure base without deflection. Prime the reverse and edges of boards using ROCATEX Acrylic Primer diluted 1:1 with clean water to help prevent moisture ingress.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMixing:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eStir thoroughly before use. Do not dilute.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eUse in conjunction with ROCATEX Waterproof Sealing Tapes, Corners, and Pipe Collars.\u003c\/p\u003e \u003cp\u003eApply the first coat of ROCATEX Waterproof Tanking Coat and, while still wet, firmly press in sealing tape, corners, or pipe collars with a minimum overlap of 50mm. Once dry (approximately 15 minutes), apply a second coat ensuring all tapes are fully covered.\u003c\/p\u003e \u003cp\u003eTiling can begin once the second coat has fully cured, approximately 1 hour at 20°C.\u003c\/p\u003e \u003cp\u003eTools can be cleaned with water while the product is still wet.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLimitations:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eNot suitable for swimming pools or areas subject to water pressure\u003c\/li\u003e \u003cli\u003eNot designed for permanently exposed outdoor conditions\u003c\/li\u003e \u003cli\u003eNot UV resistant\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWalls: 1kg\/m² at a minimum thickness of 1mm\u003c\/li\u003e \u003cli\u003eFloors: 1.5kg\/m² at a minimum thickness of 1.5mm\u003c\/li\u003e \u003cli\u003eJoints: Approximately 300g\/m\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eStore unopened in a cool, dry, frost-free environment away from direct sunlight.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHealth \u0026amp; Safety:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains aqueous SBR polymer emulsion reinforced with minerals and additives\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003cli\u003eAvoid contact with skin and eyes\u003c\/li\u003e \u003cli\u003eIf contact with eyes occurs, rinse immediately with plenty of water and seek medical advice\u003c\/li\u003e \u003cli\u003eAfter skin contact, remove contaminated clothing and wash thoroughly with soap and water\u003c\/li\u003e \u003cli\u003eWear suitable gloves and eye\/face protection\u003c\/li\u003e \u003cli\u003eIf swallowed, seek medical advice immediately and show the product label or container\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor further information, please refer to the Material Safety Data Sheet for this product.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848376361347,"sku":"TLTA-15-2030","price":83.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-15-2030_IMAGE__00335.1655466035.1280.1280.png?v=1776783341"},{"product_id":"rocatex-acrylic-primer-5-litre","title":"ROCATEX ACRYLIC PRIMER - 5 LITRE","description":"\u003ch3\u003eRocatex Acrylic Primer - 5 Litre\u003c\/h3\u003e \u003cp\u003eROCATEX Acrylic Primer is a water-based polymer emulsion designed to maximise penetration into substrates and improve surface preparation for tiling and screeding applications.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConcrete and screeds\u003c\/li\u003e \u003cli\u003eAnhydrite and gypsum surfaces\u003c\/li\u003e \u003cli\u003eTimber and plasterboard\u003c\/li\u003e \u003cli\u003eBlockwork and brickwork\u003c\/li\u003e \u003cli\u003eExisting tiles and metal\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSuitable for porous and non-porous substrates including concrete, anhydrite screeds, cement renders, existing tiles, asphalt, chipboard, plywood, and floorboards.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, sound, dry, and free from dust, dirt, grease, oil, laitance, and other contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eMechanical preparation such as scabbling is recommended to create a suitable key. If the substrate has been exposed to chemical contamination, specialist advice should be obtained before proceeding.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eROCATEX Acrylic Primer should be:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDiluted 1:1 with clean water on porous surfaces\u003c\/li\u003e \u003cli\u003eApplied neat on non-porous surfaces and anhydrite screeds\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eHighly absorbent surfaces may require additional coats.\u003c\/p\u003e \u003cp\u003eApply using a soft brush, ensuring all puddles and excess material are brushed out prior to screeding.\u003c\/p\u003e \u003cp\u003eDo not apply below 5°C or above 25°C.\u003c\/p\u003e \u003cp\u003eEnsure the primer is fully dry before further work begins.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Specific Guidance\u003c\/h3\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove surface laitance, vacuum thoroughly, then apply 2–4 neat coats of ROCATEX Acrylic Primer.\u003c\/p\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003cp\u003eAllow approximately 6 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface, vacuum clean, then apply 2 diluted coats.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003cp\u003eAllow approximately 3 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and apply 2 neat coats.\u003c\/p\u003e \u003cp\u003eAllow approximately 4 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003ePrime with ROCATEX Acrylic Primer diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003ePrime with ROCATEX Acrylic Primer diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eApply a neat coat to all exposed edges and joints.\u003c\/p\u003e \u003cp\u003eApply a slurry coat to the surface using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBrush on a thin coat and allow to dry.\u003c\/p\u003e \u003ch4\u003eCement Based Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if the surface is clean and sound.\u003c\/p\u003e \u003cp\u003ePriming is recommended before applying self-levelling compounds.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply a slurry coat using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eApply a thin coat with a brush and allow to dry.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This method cannot be guaranteed on bitumen surfaces.\u003c\/p\u003e \u003ch4\u003eMetal\u003c\/h4\u003e \u003cp\u003eScore the surface to provide a mechanical key.\u003c\/p\u003e \u003cp\u003eEnsure the surface is clean, dry, and free from contaminants.\u003c\/p\u003e \u003cp\u003eApply a slurry coat using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBrush on a thin coat and allow to dry.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eApproximately 10m² per kg depending on substrate absorbency and surface condition.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003cp\u003eShelf life is approximately 18 months from date of manufacture.\u003c\/p\u003e \u003cp\u003eA small amount of liquid separation may occur and can be remixed by stirring.\u003c\/p\u003e \u003cp\u003eIf the container is left open and a skin forms, remove the skin before use.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848376951171,"sku":"TLTA-15-2050","price":65.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-15-2050_IMAGE__27477.1655468226.1280.1280.jpg?v=1776783342"},{"product_id":"rocatex-c2ft-s2-rapid-flex-white-adhesive-20kg","title":"ROCATEX C2FT S2 RAPID FLEX WHITE ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2FT S2 Rapid Flex White Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eWhite Rapid-Set Highly Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, timber, and chipboard\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eUltimate grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2FT S2 Rapid Flex White is a single-part, highly flexible rapid-setting wall and floor tile adhesive suitable for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove laitance as recommended by the screed manufacturer, vacuum thoroughly, then apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2–4 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e2 diluted coats of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 diluted coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and prime with:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 4 weeks curing time.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted Acrylic Primer or Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be rigid, dry, and securely fixed at 300mm centres.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be minimum 22mm moisture-resistant grade.\u003c\/p\u003e \u003cp\u003ePrime joints and edges with neat primer and apply either:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat using adhesive powder and Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eMetal\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure surface is sound and prime with Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling.\u003c\/p\u003e \u003cp\u003eAfter installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2FT S2 Rapid Flex White with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency.\u003c\/p\u003e \u003cp\u003eMix for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full contact.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential.\u003c\/p\u003e \u003cp\u003eBack-butter tiles where necessary to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must comply with BS 5385.\u003c\/p\u003e \u003cp\u003eCheck adhesive open time by touching the adhesive bed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIf adhesive transfers to the finger, bonding is acceptable\u003c\/li\u003e \u003cli\u003eIf not, remove and replace with fresh adhesive\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not add additional water or powder once setting has begun.\u003c\/p\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBelow 5°C\u003c\/li\u003e \u003cli\u003eAbove 25°C\u003c\/li\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eDuring wet or frosty conditions\u003c\/li\u003e \u003cli\u003eOnto hot substrates\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic.\u003c\/p\u003e \u003cp\u003eSwimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-4eb5e58d44e6faa6e44f53cd515325dc.png\" alt=\"Rocatex C2FT S2 Rapid Flex White Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848377377155,"sku":"TLTA-05-2020","price":47.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2020_IMAGE__21525.1655469187.1280.1280.jpg?v=1776783345"},{"product_id":"rocatex-c2ft-s1-rapid-flex-white-adhesive-20kg","title":"ROCATEX C2FT S1 RAPID FLEX WHITE ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2FT S1 Rapid Flex White Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eWhite Rapid-Set Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, concrete, and timber\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eUltimate grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2FT S1 Rapid Flex White is a single-part flexible wall and floor tile adhesive designed for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove laitance as recommended by the screed manufacturer, vacuum thoroughly, then apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2–4 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e2 diluted coats of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 diluted coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and prime with:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 4 weeks curing time.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted Acrylic Primer or Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and prime with Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling.\u003c\/p\u003e \u003cp\u003eAfter installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003cp\u003eFor new electric underfloor heating systems, use a suitable self-levelling compound to encapsulate heating mats before tiling.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2FT S1 Rapid Flex White with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency.\u003c\/p\u003e \u003cp\u003eMix thoroughly for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full contact.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential.\u003c\/p\u003e \u003cp\u003eBack-butter tiles where necessary to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must comply with BS 5385.\u003c\/p\u003e \u003cp\u003eCheck adhesive open time by touching the adhesive bed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIf adhesive transfers to the finger, bonding is acceptable\u003c\/li\u003e \u003cli\u003eIf not, remove and replace with fresh adhesive\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not add additional water or powder once setting has begun.\u003c\/p\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBelow 5°C\u003c\/li\u003e \u003cli\u003eAbove 25°C\u003c\/li\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eDuring wet or frosty conditions\u003c\/li\u003e \u003cli\u003eOnto hot substrates\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic.\u003c\/p\u003e \u003cp\u003eSwimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-ce1dff064e314b9c4ee719325919a115.png\" alt=\"Rocatex C2FT S1 Rapid Flex White Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848377442691,"sku":"TLTA-05-2016","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2016_IMAGE__62429.1655469735.1280.1280.jpg?v=1776783346"},{"product_id":"rocatex-c10-ultimate-sealer-1-litre","title":"ROCATEX C10 ULTIMATE SEALER - 1 LITRE","description":"\u003ch3\u003eRocatex C10 Ultimate Sealer - 1 Litre\u003c\/h3\u003e \u003cp\u003eROCATEX C10 Ultimate Sealer is a high-performance, VOC-free, water-based impregnating sealer designed to provide long-lasting invisible protection against stains, dirt, mould, and limescale.\u003c\/p\u003e \u003cp\u003eSuitable for polished and unpolished natural stone, grout joints, paving, concrete, brick, and render.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuitable for polished and unpolished natural stone\u003c\/li\u003e \u003cli\u003eAlso suitable for grout, paving, concrete, brick, and render\u003c\/li\u003e \u003cli\u003eExcellent stain and dirt protection\u003c\/li\u003e \u003cli\u003eHelps protect against mould and limescale\u003c\/li\u003e \u003cli\u003eEasy application – only 1–2 coats required\u003c\/li\u003e \u003cli\u003eInvisible finish that does not alter surface appearance\u003c\/li\u003e \u003cli\u003eHighly water and oil repellent\u003c\/li\u003e \u003cli\u003eLong-lasting protection\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eIdeal for domestic and commercial applications\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDeveloped using advanced fluorochemical technology, ROCATEX C10 Ultimate Sealer penetrates porous surfaces to create a breathable, non-film-forming protective barrier.\u003c\/p\u003e \u003cp\u003eIt provides excellent resistance to water, grease, oil, staining, and everyday dirt while maintaining the natural appearance of the treated surface.\u003c\/p\u003e \u003ch3\u003eDirections for Use\u003c\/h3\u003e \u003cp\u003eShake well before use.\u003c\/p\u003e \u003cp\u003eEnsure the surface is clean, dry, and free from dirt, grime, cement residues, and grout haze before application.\u003c\/p\u003e \u003cp\u003eIf required, first clean the surface using a diluted solution of ROCATEX Tile \u0026amp; Stone Renovator (1:10 dilution), rinse thoroughly, and allow to dry completely.\u003c\/p\u003e \u003cp\u003eFactory-applied sealers or waxes on porcelain surfaces must be removed before sealing.\u003c\/p\u003e \u003cp\u003eApply generously using a sponge, brush, roller, paint pad, spray applicator, or ROCATEX Sealer Applicator.\u003c\/p\u003e \u003cp\u003eRemove excess sealer after 15–30 minutes.\u003c\/p\u003e \u003cp\u003eA second coat is recommended after approximately 1 hour to ensure complete coverage. Again, remove any excess after 15–30 minutes.\u003c\/p\u003e \u003cp\u003eTreated surfaces are typically dry enough for light foot traffic after approximately 1 hour but require up to 72 hours to achieve full stain resistance.\u003c\/p\u003e \u003cp\u003eDuring curing:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDo not cover the surface\u003c\/li\u003e \u003cli\u003eWipe up spills immediately\u003c\/li\u003e \u003cli\u003eDo not apply with underfloor heating switched on\u003c\/li\u003e \u003cli\u003eDo not apply in direct sunlight or above 25°C\u003c\/li\u003e \u003cli\u003eDo not allow excess residue to dry on the surface\u003c\/li\u003e \u003cli\u003eDo not grout until at least 4 hours after sealing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTo test sealing effectiveness, place a teaspoon of water on the treated surface for 15 minutes. If the water absorbs into the surface, an additional coat is required.\u003c\/p\u003e \u003cp\u003eAlways test on an inconspicuous area before full application.\u003c\/p\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHigh porosity surfaces:\u003c\/strong\u003e Approximately 7.5m² per litre, per coat\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eLow porosity surfaces:\u003c\/strong\u003e Approximately 15m² per litre, per coat\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePolished surfaces:\u003c\/strong\u003e Approximately 30m² per litre, per coat\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eGrout joints:\u003c\/strong\u003e Approximately 1000 linear metres per litre, per coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eMaintenance\u003c\/h3\u003e \u003cp\u003eRegularly sweep floors and clean surfaces using ROCATEX Tile \u0026amp; Stone Cleaner.\u003c\/p\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore in a cool, dry, frost-free environment between +5°C and +25°C.\u003c\/p\u003e \u003cp\u003eUnopened containers have a shelf life of up to 2 years.\u003c\/p\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eContains: 2-Methylisothiazol-3(2H)-one.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMay cause an allergic skin reaction\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003cli\u003eWear suitable gloves, protective clothing, and eye protection\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIf on skin:\u003c\/strong\u003e Wash thoroughly with soap and water. If irritation or rash occurs, seek medical advice.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848377508227,"sku":"TLTA-20-2004","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-20-2004_C10_Sealer_IMAGE__50197.1655470618.1280.1280.jpg?v=1776783348"},{"product_id":"rocatex-c2te-s1-semi-rapid-flex-white-adhesive-20kg","title":"ROCATEX C2TE S1 SEMI-RAPID FLEX WHITE ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2TE S1 Semi-Rapid Flex White Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eWhite Semi-Rapid Set Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, concrete, and timber\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eUltimate grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2TE S1 Semi-Rapid Flex White is a single-part flexible wall and floor tile adhesive designed for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove laitance as recommended by the screed manufacturer, vacuum thoroughly, then apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2–4 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e2 diluted coats of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 diluted coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and prime with:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 4 weeks curing time.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted Acrylic Primer or Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and prime with Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling.\u003c\/p\u003e \u003cp\u003eAfter installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003cp\u003eFor new electric underfloor heating systems, use a suitable self-levelling compound to encapsulate heating mats before tiling.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2TE S1 Semi-Rapid Flex White with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency.\u003c\/p\u003e \u003cp\u003eMix thoroughly for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full contact.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential.\u003c\/p\u003e \u003cp\u003eBack-butter tiles where necessary to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must comply with BS 5385.\u003c\/p\u003e \u003cp\u003eCheck adhesive open time by touching the adhesive bed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIf adhesive transfers to the finger, bonding is acceptable\u003c\/li\u003e \u003cli\u003eIf not, remove and replace with fresh adhesive\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not add additional water or powder once setting has begun.\u003c\/p\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBelow 5°C\u003c\/li\u003e \u003cli\u003eAbove 25°C\u003c\/li\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eDuring wet or frosty conditions\u003c\/li\u003e \u003cli\u003eOnto hot substrates\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic.\u003c\/p\u003e \u003cp\u003eSwimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-94afd535f2748350a9b2f13c9b5b145c.png\" alt=\"Rocatex C2TE S1 Semi-Rapid Flex White Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848377934211,"sku":"TLTA-05-2018","price":38.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2018_IMAGE__92832.1655472497.1280.1280.jpg?v=1776783349"},{"product_id":"rocatex-c2ft-s1-rapid-flex-grey-adhesive-20kg","title":"ROCATEX C2FT S1 RAPID FLEX GREY ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2FT S1 Rapid Flex Grey Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eGrey Rapid-Set Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, concrete, and timber\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eHigh grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2FT S1 Rapid Flex Grey is a single-part flexible wall and floor tile adhesive designed for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH. Remove laitance, vacuum thoroughly, then apply 2–4 neat coats of ROCATEX Acrylic Primer or 2 diluted coats of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer. Allow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance, ensure it is clean, then prime with ROCATEX Acrylic Primer or ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted ROCATEX Acrylic Primer or ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat of ROCATEX Ultimate Grip Primer or a suitable slurry coat.\u003c\/p\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and prime with ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling. After installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2FT S1 Rapid Flex Grey with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency. Mix thoroughly for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full adhesive transfer.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential. Back-butter tiles where required to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must be installed in accordance with BS 5385.\u003c\/p\u003e \u003cp\u003eDo not add water or powder once the mix has started to set.\u003c\/p\u003e \u003cp\u003eDo not apply below 5°C, above 25°C, in direct sunlight, during wet or frosty conditions, or onto hot substrates.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic. Swimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-ae223c0e58bd761001bd6a456fd75f06.png\" alt=\"Rocatex C2FT S1 Rapid Flex Grey Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848378491267,"sku":"TLTA-05-2012","price":30.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2012_IMAGE__17767.1655472892.1280.1280.jpg?v=1776783351"},{"product_id":"rocatex-c2te-s1-semi-rapid-flex-grey-adhesive-20kg","title":"ROCATEX C2TE S1 SEMI-RAPID FLEX GREY ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2TE S1 Semi-Rapid Flex Grey Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eGrey Semi-Rapid Set Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, concrete, and timber\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eUltimate grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2TE S1 Semi-Rapid Flex Grey is a single-part flexible wall and floor tile adhesive designed for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove laitance as recommended by the screed manufacturer, vacuum thoroughly, then apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2–4 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e2 diluted coats of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 diluted coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and prime with:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 4 weeks curing time.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted Acrylic Primer or Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and prime with Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling.\u003c\/p\u003e \u003cp\u003eAfter installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003cp\u003eFor new electric underfloor heating systems, use a suitable self-levelling compound before tiling.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2TE S1 Semi-Rapid Flex Grey with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency.\u003c\/p\u003e \u003cp\u003eMix thoroughly for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full contact.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential.\u003c\/p\u003e \u003cp\u003eBack-butter tiles where necessary to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must comply with BS 5385.\u003c\/p\u003e \u003cp\u003eCheck adhesive open time by touching the adhesive bed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIf adhesive transfers to the finger, bonding is acceptable\u003c\/li\u003e \u003cli\u003eIf not, remove and replace with fresh adhesive\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not add additional water or powder once setting has begun.\u003c\/p\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBelow 5°C\u003c\/li\u003e \u003cli\u003eAbove 25°C\u003c\/li\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eDuring wet or frosty conditions\u003c\/li\u003e \u003cli\u003eOnto hot substrates\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic.\u003c\/p\u003e \u003cp\u003eSwimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-bfe56e95eff319f948b7308670c98c69.png\" alt=\"Rocatex C2TE S1 Semi-Rapid Flex Grey Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848378556803,"sku":"TLTA-05-2014","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2014_IMAGE__86665.1655473299.1280.1280.jpg?v=1776783353"},{"product_id":"rocatex-c10-ultimate-sealer-spray","title":"ROCATEX C10 ULTIMATE SEALER - SPRAY","description":"\u003ch3\u003eRocatex C10 Ultimate Sealer - Spray\u003c\/h3\u003e \u003cp\u003eROCATEX C10 Ultimate Sealer Spray is a high-performance, VOC-free, water-based impregnating sealer that provides an invisible and durable protective barrier against stains, dirt, mould, and limescale.\u003c\/p\u003e \u003cp\u003eSuitable for polished and unpolished natural stone, grout joints, paving, concrete, brick, and render.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuitable for polished and unpolished natural stone\u003c\/li\u003e \u003cli\u003eAlso suitable for grout, paving, concrete, brick, and render\u003c\/li\u003e \u003cli\u003eExcellent stain and dirt protection\u003c\/li\u003e \u003cli\u003eHelps protect against mould and limescale\u003c\/li\u003e \u003cli\u003eEasy to apply – only 1–2 coats required\u003c\/li\u003e \u003cli\u003eInvisible finish that does not alter surface appearance\u003c\/li\u003e \u003cli\u003eHighly water and oil repellent\u003c\/li\u003e \u003cli\u003eLong-lasting protection\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eIdeal for domestic and commercial applications\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDeveloped using advanced fluorochemical technology, ROCATEX C10 Ultimate Sealer penetrates porous surfaces to create a breathable, non-film-forming protective barrier.\u003c\/p\u003e \u003cp\u003eIt provides excellent resistance to water, grease, oil, staining, and everyday dirt while maintaining the natural appearance of the treated surface.\u003c\/p\u003e \u003ch3\u003eDirections for Use\u003c\/h3\u003e \u003cp\u003eShake well before use.\u003c\/p\u003e \u003cp\u003eEnsure the surface is clean, dry, and free from dirt, grime, cement residues, and grout haze before application.\u003c\/p\u003e \u003cp\u003eIf required, first clean the surface using a diluted solution of ROCATEX Tile \u0026amp; Stone Renovator (1:10 dilution), rinse thoroughly, and allow to dry completely.\u003c\/p\u003e \u003cp\u003eFactory-applied sealers or waxes on porcelain surfaces must be removed before sealing.\u003c\/p\u003e \u003cp\u003eApply generously using a sponge, brush, roller, paint pad, spray applicator, or ROCATEX Sealer Applicator.\u003c\/p\u003e \u003cp\u003eRemove excess sealer after 15–30 minutes.\u003c\/p\u003e \u003cp\u003eA second coat is recommended after approximately 1 hour to ensure complete coverage. Again, remove any excess after 15–30 minutes.\u003c\/p\u003e \u003cp\u003eTreated surfaces are typically dry enough for light foot traffic after approximately 1 hour but require up to 72 hours to achieve full stain resistance.\u003c\/p\u003e \u003cp\u003eDuring curing:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDo not cover the surface\u003c\/li\u003e \u003cli\u003eWipe up spills immediately\u003c\/li\u003e \u003cli\u003eDo not apply with underfloor heating switched on\u003c\/li\u003e \u003cli\u003eDo not apply in direct sunlight or above 25°C\u003c\/li\u003e \u003cli\u003eDo not allow excess residue to dry on the surface\u003c\/li\u003e \u003cli\u003eDo not grout until at least 4 hours after sealing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTo test sealing effectiveness, place a teaspoon of water on the treated surface for 15 minutes. If the water absorbs into the surface, an additional coat is required.\u003c\/p\u003e \u003cp\u003eAlways test on an inconspicuous area before full application.\u003c\/p\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHigh porosity surfaces:\u003c\/strong\u003e Approximately 7.5m² per litre, per coat\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eLow porosity surfaces:\u003c\/strong\u003e Approximately 15m² per litre, per coat\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePolished surfaces:\u003c\/strong\u003e Approximately 30m² per litre, per coat\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eGrout joints:\u003c\/strong\u003e Approximately 1000 linear metres per litre, per coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eMaintenance\u003c\/h3\u003e \u003cp\u003eRegularly sweep floors and clean surfaces using ROCATEX Tile \u0026amp; Stone Cleaner.\u003c\/p\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore in a cool, dry, frost-free environment between +5°C and +25°C.\u003c\/p\u003e \u003cp\u003eUnopened containers have a shelf life of up to 2 years.\u003c\/p\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eContains: 2-Methylisothiazol-3(2H)-one.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMay cause an allergic skin reaction\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003cli\u003eWear suitable gloves, protective clothing, and eye protection\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIf on skin:\u003c\/strong\u003e Wash thoroughly with soap and water. If irritation or rash occurs, seek medical advice.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848378720643,"sku":"TLTA-20-2008","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-20-2008_C10_Sealer_IMAGE__06518.1655473611.1280.1280.jpg?v=1776783354"},{"product_id":"rocatex-grout-cement-remover-1-litre","title":"ROCATEX GROUT \u0026 CEMENT REMOVER - 1 LITRE","description":"\u003ch3\u003eRocatex Grout \u0026amp; Cement Remover - 1 Litre\u003c\/h3\u003e \u003cp\u003eA rapid-action cleaning solution designed to remove cement residues, grout stains, efflorescence, and similar deposits from a wide range of surfaces.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic \u0026amp; porcelain tiles\u003c\/li\u003e \u003cli\u003eSlate \u0026amp; natural stone\u003c\/li\u003e \u003cli\u003eTerracotta \u0026amp; quarry tiles\u003c\/li\u003e \u003cli\u003eBrick \u0026amp; paving\u003c\/li\u003e \u003cli\u003eRemoves cement stains\u003c\/li\u003e \u003cli\u003eEffective limescale remover\u003c\/li\u003e \u003cli\u003eEfflorescence remover\u003c\/li\u003e \u003cli\u003eSuitable for interior \u0026amp; exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX Grout \u0026amp; Cement Remover is suitable for use on glazed and unglazed ceramics, slate, quarry tiles, brick, terracotta, and stone surfaces. It can be used diluted or undiluted depending on the severity of the residue.\u003c\/p\u003e \u003ch3\u003eDirections for Use\u003c\/h3\u003e \u003ch4\u003eMild Residue \u0026amp; Absorbent Tiles\u003c\/h4\u003e \u003cp\u003eDilute 1 part ROCATEX Grout \u0026amp; Cement Remover with 4 parts warm water. Apply using a cloth or sponge and wipe thoroughly with a clean damp cloth.\u003c\/p\u003e \u003ch4\u003eModerate Residue\u003c\/h4\u003e \u003cp\u003eDilute 1 part ROCATEX Grout \u0026amp; Cement Remover with 1 part warm water. Apply generously across the tile surface. Agitate with a scrubbing brush if required and leave for 5–10 minutes, keeping the surface wet with additional solution if necessary. Rinse thoroughly with clean water.\u003c\/p\u003e \u003ch4\u003eHeavy Residue\u003c\/h4\u003e \u003cp\u003eUse undiluted and agitate with a scrubbing brush or mechanical scrubber if required. Thoroughly neutralise the treated surface with clean water after use.\u003c\/p\u003e \u003ch3\u003ePlease Note\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAlways test on a small inconspicuous area before full application\u003c\/li\u003e \u003cli\u003eAvoid prolonged contact with grout joints\u003c\/li\u003e \u003cli\u003eNeutralise all treated surfaces with clean water after use\u003c\/li\u003e \u003cli\u003eDo not use on acid-sensitive surfaces such as stainless steel, chrome, enamel, marble, or limestone unless fully understood and tested\u003c\/li\u003e \u003cli\u003eIn high humidity conditions, vapours may react with acid-sensitive materials\u003c\/li\u003e \u003cli\u003eAny accidental contamination should be rinsed immediately with plenty of clean water\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eApproximately 5–25m² per litre depending on dilution and surface condition.\u003c\/p\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore in a cool, dry, frost-free environment.\u003c\/p\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eContains:\u003c\/strong\u003e Hydrochloric acid.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848380555651,"sku":"TLTA-20-2026","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-20-2026_IMAGE__33305.1655474627.1280.1280.jpg?v=1776783379"},{"product_id":"rocatex-tile-stone-renovator-1-litre","title":"ROCATEX TILE \u0026 STONE RENOVATOR - 1 LITRE","description":"\u003ch3\u003eRocatex Tile \u0026amp; Stone Renovator - 1 Litre\u003c\/h3\u003e \u003cp\u003eAn intensive cleaner formulated to remove oil, grease, ingrained dirt, grime, and old wax layers from a wide range of tiled and stone surfaces.\u003c\/p\u003e \u003cp\u003eIdeal for deep cleaning and restoring heavily soiled floors, tiles, patios, and exterior paving.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic \u0026amp; porcelain tiles\u003c\/li\u003e \u003cli\u003eTravertine \u0026amp; limestone\u003c\/li\u003e \u003cli\u003eMarble \u0026amp; granite\u003c\/li\u003e \u003cli\u003eSandstone \u0026amp; slate\u003c\/li\u003e \u003cli\u003eTerracotta \u0026amp; quarry tiles\u003c\/li\u003e \u003cli\u003eBrick \u0026amp; paving\u003c\/li\u003e \u003cli\u003eEffective grime remover\u003c\/li\u003e \u003cli\u003eSuitable for interior \u0026amp; exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX Tile \u0026amp; Stone Renovator is suitable for removing stubborn stains and existing sealers from floors and tiled surfaces.\u003c\/p\u003e \u003cp\u003eIt is also ideal for cleaning driveways, patios, and paths.\u003c\/p\u003e \u003ch3\u003eDirections for Use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Always test on an inconspicuous area before full application.\u003c\/p\u003e \u003cp\u003eProtect painted surfaces, untreated wood, and sensitive materials before use. Rinse any overspray immediately.\u003c\/p\u003e \u003cp\u003eAny remaining alkalinity should be neutralised using clean water after cleaning.\u003c\/p\u003e \u003ch4\u003eMild Cleaning\u003c\/h4\u003e \u003cp\u003eDilute 1 part ROCATEX Tile \u0026amp; Stone Renovator with 10 parts warm water.\u003c\/p\u003e \u003cp\u003eApply using a cloth or mop and wipe clean with a damp cloth.\u003c\/p\u003e \u003ch4\u003eModerate Soiling\u003c\/h4\u003e \u003cp\u003eDilute 1 part ROCATEX Tile \u0026amp; Stone Renovator with 3 parts warm water.\u003c\/p\u003e \u003cp\u003eApply generously and agitate using a scrubbing brush if required.\u003c\/p\u003e \u003cp\u003eLeave for 5–10 minutes while keeping the surface wet with additional solution if necessary.\u003c\/p\u003e \u003cp\u003eAgitate again, mop up, and rinse thoroughly with clean water.\u003c\/p\u003e \u003ch4\u003eHeavy Soiling\u003c\/h4\u003e \u003cp\u003eUse undiluted and agitate using a scrubbing brush or mechanical scrubber if necessary.\u003c\/p\u003e \u003cp\u003eNeutralise the treated surface thoroughly with clean water after use.\u003c\/p\u003e \u003ch3\u003ePlease Note\u003c\/h3\u003e \u003cp\u003eThis product is not intended for routine daily cleaning of sealed surfaces.\u003c\/p\u003e \u003cp\u003ePreviously sealed surfaces should be re-sealed after cleaning once fully rinsed and completely dry (minimum 24 hours drying time).\u003c\/p\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eMild cleaning:\u003c\/strong\u003e Approximately 50m² per litre\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eModerate soiling:\u003c\/strong\u003e Approximately 20m² per litre\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHeavy soiling:\u003c\/strong\u003e Approximately 5–10m² per litre\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore in a cool, dry, frost-free environment.\u003c\/p\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003cli\u003eUse only in well-ventilated areas\u003c\/li\u003e \u003cli\u003eAvoid inhaling vapours or spray\u003c\/li\u003e \u003cli\u003eIf in eyes, rinse cautiously with water for several minutes\u003c\/li\u003e \u003cli\u003eRemove contact lenses if present and continue rinsing\u003c\/li\u003e \u003cli\u003eStore in a well-ventilated place with the container tightly closed\u003c\/li\u003e \u003cli\u003eDispose of contents and containers in accordance with local regulations\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eContains: \u0026lt;5% non-ionic surfactants and phosphates.\u003c\/p\u003e \u003cp\u003e Ingredients information: \u003ca href=\"http:\/\/www.rocatex.com\/detergents\" target=\"_blank\" rel=\"noopener\"\u003e www.rocatex.com\/detergents \u003c\/a\u003e \u003c\/p\u003e \u003cp\u003eThis information is provided without guarantee. Always test on a small inconspicuous area before full application.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848380686723,"sku":"TLTA-20-2028","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-20-2028_IMAGE__60696.1655475068.1280.1280.jpg?v=1776783381"},{"product_id":"rocatex-tile-stone-cleaner-1-litre","title":"ROCATEX TILE \u0026 STONE CLEANER - 1 LITRE","description":"\u003ch3\u003eRocatex Tile \u0026amp; Stone Cleaner - 1 Litre\u003c\/h3\u003e \u003cp\u003eA high-quality liquid soap containing a trace of linseed oil, specially formulated to clean delicate surfaces without causing damage.\u003c\/p\u003e \u003cp\u003eLeaves a fresh, clean fragrance after use.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eNatural stone \u0026amp; granite\u003c\/li\u003e \u003cli\u003eTravertine \u0026amp; limestone\u003c\/li\u003e \u003cli\u003eMarble \u0026amp; polished stone\u003c\/li\u003e \u003cli\u003eSandstone \u0026amp; slate\u003c\/li\u003e \u003cli\u003eTerracotta \u0026amp; quarry tiles\u003c\/li\u003e \u003cli\u003eBrick \u0026amp; paving\u003c\/li\u003e \u003cli\u003eSuitable for floors \u0026amp; worktops\u003c\/li\u003e \u003cli\u003eInterior \u0026amp; exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX Tile \u0026amp; Stone Cleaner is suitable for travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles, and flagstones.\u003c\/p\u003e \u003cp\u003eSuitable for both sealed and unsealed surfaces, including polished and unpolished finishes.\u003c\/p\u003e \u003cp\u003eIdeal for maintaining surfaces protected with ROCATEX Natural Finish, Colour Enhancing, Polished Stone \u0026amp; Porcelain, Satin Finish, and Stone \u0026amp; Grout Sealers.\u003c\/p\u003e \u003ch3\u003eDirections for Use\u003c\/h3\u003e \u003cp\u003eDilute 2–3 capfuls in a bucket of warm water. For dirtier floors, use up to 5 capfuls.\u003c\/p\u003e \u003cp\u003eWash the surface and allow to dry naturally. No rinsing is required.\u003c\/p\u003e \u003ch3\u003ePlease Note\u003c\/h3\u003e \u003cp\u003eOn waxed or polished surfaces such as porcelain, granite, and glass, finish by buffing with a dry soft cloth or polishing machine.\u003c\/p\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003e1 litre of ROCATEX Tile \u0026amp; Stone Cleaner is sufficient to clean an average 20m² floor approximately 40 times.\u003c\/p\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore in a cool, dry, frost-free environment.\u003c\/p\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCauses serious eye irritation\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003cli\u003eWash contaminated skin thoroughly after handling\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIf in eyes:\u003c\/strong\u003e Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek medical advice if irritation persists.\u003c\/p\u003e \u003cp\u003eStore in a sealed container and dispose of contents in accordance with local regulations.\u003c\/p\u003e \u003cp\u003eContains surfactants in accordance with EC regulations.\u003c\/p\u003e \u003cp\u003e Ingredients information: \u003ca href=\"http:\/\/www.rocatex.com\/detergents\" target=\"_blank\" rel=\"noopener\"\u003e www.rocatex.com\/detergents \u003c\/a\u003e \u003c\/p\u003e \u003cp\u003eThis information is provided without guarantee. Always test on an inconspicuous area before full application.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848381407619,"sku":"TLTA-20-2034","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-20-2034_IMAGE__31028.1655475903.1280.1280.jpg?v=1776783383"},{"product_id":"rocatex-mould-remover-500ml-spray","title":"ROCATEX MOULD REMOVER - 500ML SPRAY","description":"\u003ch3\u003eRocatex Mould Remover - 500ml Spray\u003c\/h3\u003e \u003cp\u003eTargets and removes mould spores, fungus, algae, and moss from grout joints, tiles, silicone surfaces, and other damp areas.\u003c\/p\u003e \u003cp\u003eIts antibacterial formulation helps prevent re-growth, making it ideal for bathrooms, kitchens, and other moisture-prone environments.\u003c\/p\u003e \u003cp\u003eThe bleaching action helps restore white grout to its original colour.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRemoves mould, fungus, algae, and moss\u003c\/li\u003e \u003cli\u003eSuitable for grout joints, tiles, and silicone\u003c\/li\u003e \u003cli\u003eAntibacterial protection helps prevent re-growth\u003c\/li\u003e \u003cli\u003eIdeal for bathrooms and kitchens\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eBleaching action restores white grout\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eDirections for Use\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eShake well before use.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThis product contains bleaching agents. Always test on a small inconspicuous area before full application.\u003c\/p\u003e \u003cp\u003eEnsure surfaces are completely dry before use.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHold the bottle upright and spray from 5–10cm away\u003c\/li\u003e \u003cli\u003eLeave for approximately 45 minutes\u003c\/li\u003e \u003cli\u003eApply a small amount of water and agitate using a stiff brush\u003c\/li\u003e \u003cli\u003eRinse thoroughly using clean water and a sponge\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor stubborn stains and most silicone or elastic grout joints, leave the product on overnight before rinsing.\u003c\/p\u003e \u003cp\u003eIn case of contact with metals, fabrics, or painted surfaces, rinse immediately with water.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo not use with acid-based grout removers or other acid cleaners.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSuitable for natural stone and coloured grout, however always test first in an inconspicuous area.\u003c\/p\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eApproximately 5–15m² depending on tile size and surface condition.\u003c\/p\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore upright in a cool, dry, frost-free environment.\u003c\/p\u003e \u003cp\u003eOnce opened, use within 6 months.\u003c\/p\u003e \u003ch3\u003eImportant\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFood Establishments:\u003c\/strong\u003e Equipment and surfaces that come into direct contact with food must be thoroughly rinsed with potable water after cleaning.\u003c\/p\u003e \u003cp\u003eAvoid contamination of food during use and do not store in food preparation or food storage areas.\u003c\/p\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003cli\u003eWear suitable gloves, protective clothing, and eye\/face protection\u003c\/li\u003e \u003cli\u003eWash contaminated skin thoroughly after handling\u003c\/li\u003e \u003cli\u003eIf on skin, wash thoroughly with water\u003c\/li\u003e \u003cli\u003eIf irritation occurs, seek medical advice\u003c\/li\u003e \u003cli\u003eUse only in well-ventilated areas\u003c\/li\u003e \u003cli\u003eDo not inhale vapours or spray\u003c\/li\u003e \u003cli\u003eContact with acids releases toxic gas\u003c\/li\u003e \u003cli\u003eDispose of contents and container in accordance with local regulations\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eContains:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u0026lt;5% anionic surfactants\u003c\/li\u003e \u003cli\u003e\u0026lt;5% non-ionic surfactants\u003c\/li\u003e \u003cli\u003e\u0026lt;5% Sodium Hypochlorite\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Ingredients information: \u003ca href=\"http:\/\/www.rocatex.com\/detergents\" target=\"_blank\" rel=\"noopener\"\u003e www.rocatex.com\/detergents \u003c\/a\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848381702531,"sku":"TLTA-20-2032","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-20-2032_IMAGE__03153.1655476121.1280.1280.jpg?v=1776783384"},{"product_id":"rocatex-acrylic-primer-1-litre","title":"ROCATEX ACRYLIC PRIMER - 1 LITRE","description":"\u003ch3\u003eRocatex Acrylic Primer - 1 Litre\u003c\/h3\u003e \u003cp\u003eROCATEX Acrylic Primer is a water-based polymer emulsion designed to maximise penetration into substrates and improve surface preparation for tiling and screeding applications.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConcrete and screeds\u003c\/li\u003e \u003cli\u003eAnhydrite and gypsum surfaces\u003c\/li\u003e \u003cli\u003eTimber and plasterboard\u003c\/li\u003e \u003cli\u003eBlockwork and brickwork\u003c\/li\u003e \u003cli\u003eExisting tiles and metal\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSuitable for porous and non-porous substrates including concrete, anhydrite screeds, cement renders, existing tiles, asphalt, chipboard, plywood, and floorboards.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, sound, dry, and free from dust, dirt, grease, oil, laitance, and other contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eMechanical preparation such as scabbling is recommended to create a suitable key. If the substrate has been exposed to chemical contamination, specialist advice should be obtained before proceeding.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eROCATEX Acrylic Primer should be:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDiluted 1:1 with clean water on porous surfaces\u003c\/li\u003e \u003cli\u003eApplied neat on non-porous surfaces and anhydrite screeds\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eHighly absorbent surfaces may require additional coats.\u003c\/p\u003e \u003cp\u003eApply using a soft brush, ensuring all puddles and excess material are brushed out prior to screeding.\u003c\/p\u003e \u003cp\u003eDo not apply below 5°C or above 25°C.\u003c\/p\u003e \u003cp\u003eEnsure the primer is fully dry before further work begins.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSubstrate Specific Guidance\u003c\/h3\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove surface laitance, vacuum thoroughly, then apply 2–4 neat coats of ROCATEX Acrylic Primer.\u003c\/p\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003cp\u003eAllow approximately 6 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface, vacuum clean, then apply 2 diluted coats.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003cp\u003eAllow approximately 3 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and apply 2 neat coats.\u003c\/p\u003e \u003cp\u003eAllow approximately 4 weeks curing before tiling.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eApply 2 coats diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003ePrime with ROCATEX Acrylic Primer diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003ePrime with ROCATEX Acrylic Primer diluted 1:1 with clean water.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eApply a neat coat to all exposed edges and joints.\u003c\/p\u003e \u003cp\u003eApply a slurry coat to the surface using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBrush on a thin coat and allow to dry.\u003c\/p\u003e \u003ch4\u003eCement Based Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if the surface is clean and sound.\u003c\/p\u003e \u003cp\u003ePriming is recommended before applying self-levelling compounds.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply a slurry coat using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eApply a thin coat with a brush and allow to dry.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This method cannot be guaranteed on bitumen surfaces.\u003c\/p\u003e \u003ch4\u003eMetal\u003c\/h4\u003e \u003cp\u003eScore the surface to provide a mechanical key.\u003c\/p\u003e \u003cp\u003eEnsure the surface is clean, dry, and free from contaminants.\u003c\/p\u003e \u003cp\u003eApply a slurry coat using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 part cement adhesive powder\u003c\/li\u003e \u003cli\u003e1 part ROCATEX Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBrush on a thin coat and allow to dry.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eApproximately 10m² per kg depending on substrate absorbency and surface condition.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003cp\u003eShelf life is approximately 18 months from date of manufacture.\u003c\/p\u003e \u003cp\u003eA small amount of liquid separation may occur and can be remixed by stirring.\u003c\/p\u003e \u003cp\u003eIf the container is left open and a skin forms, remove the skin before use.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848381768067,"sku":"TLTA-15-2010","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-15-2010_IMAGE__67451.1655476432.1280.1280.jpg?v=1776783386"}],"url":"https:\/\/www.tilefixstore.co.uk\/collections\/rocatex.oembed","provider":"TileFix Store","version":"1.0","type":"link"}