{"title":"Tile Adhesives","description":"","products":[{"product_id":"rocatex-c2ft-s2-rapid-flex-white-adhesive-20kg","title":"ROCATEX C2FT S2 RAPID FLEX WHITE ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2FT S2 Rapid Flex White Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eWhite Rapid-Set Highly Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, timber, and chipboard\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eUltimate grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2FT S2 Rapid Flex White is a single-part, highly flexible rapid-setting wall and floor tile adhesive suitable for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove laitance as recommended by the screed manufacturer, vacuum thoroughly, then apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2–4 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e2 diluted coats of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 diluted coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and prime with:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 4 weeks curing time.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted Acrylic Primer or Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be rigid, dry, and securely fixed at 300mm centres.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be minimum 22mm moisture-resistant grade.\u003c\/p\u003e \u003cp\u003ePrime joints and edges with neat primer and apply either:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat using adhesive powder and Acrylic Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eMetal\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure surface is sound and prime with Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling.\u003c\/p\u003e \u003cp\u003eAfter installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2FT S2 Rapid Flex White with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency.\u003c\/p\u003e \u003cp\u003eMix for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full contact.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential.\u003c\/p\u003e \u003cp\u003eBack-butter tiles where necessary to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must comply with BS 5385.\u003c\/p\u003e \u003cp\u003eCheck adhesive open time by touching the adhesive bed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIf adhesive transfers to the finger, bonding is acceptable\u003c\/li\u003e \u003cli\u003eIf not, remove and replace with fresh adhesive\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not add additional water or powder once setting has begun.\u003c\/p\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBelow 5°C\u003c\/li\u003e \u003cli\u003eAbove 25°C\u003c\/li\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eDuring wet or frosty conditions\u003c\/li\u003e \u003cli\u003eOnto hot substrates\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic.\u003c\/p\u003e \u003cp\u003eSwimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-4eb5e58d44e6faa6e44f53cd515325dc.png\" alt=\"Rocatex C2FT S2 Rapid Flex White Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848377377155,"sku":"TLTA-05-2020","price":47.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2020_IMAGE__21525.1655469187.1280.1280.jpg?v=1776783345"},{"product_id":"rocatex-c2ft-s1-rapid-flex-white-adhesive-20kg","title":"ROCATEX C2FT S1 RAPID FLEX WHITE ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2FT S1 Rapid Flex White Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eWhite Rapid-Set Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, concrete, and timber\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eUltimate grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2FT S1 Rapid Flex White is a single-part flexible wall and floor tile adhesive designed for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove laitance as recommended by the screed manufacturer, vacuum thoroughly, then apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2–4 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e2 diluted coats of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 diluted coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and prime with:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 4 weeks curing time.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted Acrylic Primer or Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and prime with Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling.\u003c\/p\u003e \u003cp\u003eAfter installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003cp\u003eFor new electric underfloor heating systems, use a suitable self-levelling compound to encapsulate heating mats before tiling.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2FT S1 Rapid Flex White with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency.\u003c\/p\u003e \u003cp\u003eMix thoroughly for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full contact.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential.\u003c\/p\u003e \u003cp\u003eBack-butter tiles where necessary to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must comply with BS 5385.\u003c\/p\u003e \u003cp\u003eCheck adhesive open time by touching the adhesive bed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIf adhesive transfers to the finger, bonding is acceptable\u003c\/li\u003e \u003cli\u003eIf not, remove and replace with fresh adhesive\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not add additional water or powder once setting has begun.\u003c\/p\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBelow 5°C\u003c\/li\u003e \u003cli\u003eAbove 25°C\u003c\/li\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eDuring wet or frosty conditions\u003c\/li\u003e \u003cli\u003eOnto hot substrates\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic.\u003c\/p\u003e \u003cp\u003eSwimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-ce1dff064e314b9c4ee719325919a115.png\" alt=\"Rocatex C2FT S1 Rapid Flex White Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848377442691,"sku":"TLTA-05-2016","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2016_IMAGE__62429.1655469735.1280.1280.jpg?v=1776783346"},{"product_id":"rocatex-c2te-s1-semi-rapid-flex-white-adhesive-20kg","title":"ROCATEX C2TE S1 SEMI-RAPID FLEX WHITE ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2TE S1 Semi-Rapid Flex White Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eWhite Semi-Rapid Set Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, concrete, and timber\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eUltimate grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2TE S1 Semi-Rapid Flex White is a single-part flexible wall and floor tile adhesive designed for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove laitance as recommended by the screed manufacturer, vacuum thoroughly, then apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2–4 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e2 diluted coats of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 diluted coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and prime with:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 4 weeks curing time.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted Acrylic Primer or Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and prime with Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling.\u003c\/p\u003e \u003cp\u003eAfter installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003cp\u003eFor new electric underfloor heating systems, use a suitable self-levelling compound to encapsulate heating mats before tiling.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2TE S1 Semi-Rapid Flex White with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency.\u003c\/p\u003e \u003cp\u003eMix thoroughly for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full contact.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential.\u003c\/p\u003e \u003cp\u003eBack-butter tiles where necessary to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must comply with BS 5385.\u003c\/p\u003e \u003cp\u003eCheck adhesive open time by touching the adhesive bed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIf adhesive transfers to the finger, bonding is acceptable\u003c\/li\u003e \u003cli\u003eIf not, remove and replace with fresh adhesive\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not add additional water or powder once setting has begun.\u003c\/p\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBelow 5°C\u003c\/li\u003e \u003cli\u003eAbove 25°C\u003c\/li\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eDuring wet or frosty conditions\u003c\/li\u003e \u003cli\u003eOnto hot substrates\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic.\u003c\/p\u003e \u003cp\u003eSwimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-94afd535f2748350a9b2f13c9b5b145c.png\" alt=\"Rocatex C2TE S1 Semi-Rapid Flex White Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848377934211,"sku":"TLTA-05-2018","price":38.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2018_IMAGE__92832.1655472497.1280.1280.jpg?v=1776783349"},{"product_id":"rocatex-c2ft-s1-rapid-flex-grey-adhesive-20kg","title":"ROCATEX C2FT S1 RAPID FLEX GREY ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2FT S1 Rapid Flex Grey Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eGrey Rapid-Set Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, concrete, and timber\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eHigh grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2FT S1 Rapid Flex Grey is a single-part flexible wall and floor tile adhesive designed for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH. Remove laitance, vacuum thoroughly, then apply 2–4 neat coats of ROCATEX Acrylic Primer or 2 diluted coats of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using 2 diluted coats of ROCATEX Acrylic Primer or 1 diluted coat of ROCATEX Ultimate Grip Primer. Allow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance, ensure it is clean, then prime with ROCATEX Acrylic Primer or ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted ROCATEX Acrylic Primer or ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply 1 neat coat of ROCATEX Ultimate Grip Primer or a suitable slurry coat.\u003c\/p\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and prime with ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling. After installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2FT S1 Rapid Flex Grey with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency. Mix thoroughly for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full adhesive transfer.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential. Back-butter tiles where required to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must be installed in accordance with BS 5385.\u003c\/p\u003e \u003cp\u003eDo not add water or powder once the mix has started to set.\u003c\/p\u003e \u003cp\u003eDo not apply below 5°C, above 25°C, in direct sunlight, during wet or frosty conditions, or onto hot substrates.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic. Swimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-ae223c0e58bd761001bd6a456fd75f06.png\" alt=\"Rocatex C2FT S1 Rapid Flex Grey Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848378491267,"sku":"TLTA-05-2012","price":30.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2012_IMAGE__17767.1655472892.1280.1280.jpg?v=1776783351"},{"product_id":"rocatex-c2te-s1-semi-rapid-flex-grey-adhesive-20kg","title":"ROCATEX C2TE S1 SEMI-RAPID FLEX GREY ADHESIVE - 20KG","description":"\u003ch3\u003eRocatex C2TE S1 Semi-Rapid Flex Grey Adhesive - 20kg\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eGrey Semi-Rapid Set Flexible Adhesive for Natural Stone \u0026amp; Tiles\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCeramic, porcelain, and mosaics\u003c\/li\u003e \u003cli\u003eNatural stone and flagstones\u003c\/li\u003e \u003cli\u003eSuitable for screeds, concrete, and timber\u003c\/li\u003e \u003cli\u003eCompatible with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for swimming pools and wet areas\u003c\/li\u003e \u003cli\u003eUltimate grab performance\u003c\/li\u003e \u003cli\u003eNon-slip formulation\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eApproximate coverage: 6m² at 3mm bed thickness per 20kg bag\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eROCATEX C2TE S1 Semi-Rapid Flex Grey is a single-part flexible wall and floor tile adhesive designed for fixing natural stone, ceramic, porcelain, and mosaic tiles to a wide range of substrates.\u003c\/p\u003e \u003cp\u003eSuitable for both interior and exterior applications.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eSurface Preparation\u003c\/h3\u003e \u003cp\u003eAll surfaces must be clean, dry, firm, and free from dust, grease, oil, laitance, and contaminants that may affect adhesion.\u003c\/p\u003e \u003cp\u003eSubstrates should provide a rigid and stable base capable of supporting the intended load.\u003c\/p\u003e \u003ch4\u003eAnhydrite Screeds\u003c\/h4\u003e \u003cp\u003eMoisture content must not exceed 0.5% or 75% RH.\u003c\/p\u003e \u003cp\u003eRemove laitance as recommended by the screed manufacturer, vacuum thoroughly, then apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2–4 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e2 diluted coats of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eConcrete Screeds\u003c\/h4\u003e \u003cp\u003ePrime using:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 diluted coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 6 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003ePower Floated Concrete\u003c\/h4\u003e \u003cp\u003eMechanically abrade the surface to remove curing agents, vacuum clean, then prime as above.\u003c\/p\u003e \u003ch4\u003eSand \u0026amp; Cement Screeds\u003c\/h4\u003e \u003cp\u003ePrime as above and allow approximately 3 weeks curing time before tiling.\u003c\/p\u003e \u003ch4\u003eGypsum Plaster\u003c\/h4\u003e \u003cp\u003eRoughen the surface to remove laitance and prime with:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 neat coats of ROCATEX Acrylic Primer, or\u003c\/li\u003e \u003cli\u003e1 diluted coat of ROCATEX Ultimate Grip Primer\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAllow approximately 4 weeks curing time.\u003c\/p\u003e \u003ch4\u003ePlasterboards\u003c\/h4\u003e \u003cp\u003eSkimming is not required. Prime with diluted Acrylic Primer or Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003ePlywood\u003c\/h4\u003e \u003cp\u003eMust be minimum 15mm exterior grade, securely fixed at 300mm centres with supported joints.\u003c\/p\u003e \u003ch4\u003eTongue \u0026amp; Groove Boards \/ Floorboards\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eChipboard\u003c\/h4\u003e \u003cp\u003eMust be overboarded with plywood or use ROCATEX S2 adhesive.\u003c\/p\u003e \u003ch4\u003eCement Tile Backer Boards\u003c\/h4\u003e \u003cp\u003ePriming is not required if surfaces are clean and sound.\u003c\/p\u003e \u003ch4\u003eExisting Tiles \u0026amp; Non-Porous Surfaces\u003c\/h4\u003e \u003cp\u003eApply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 neat coat of Ultimate Grip Primer, or\u003c\/li\u003e \u003cli\u003eA slurry coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eFlooring Grade Asphalt\u003c\/h4\u003e \u003cp\u003eEnsure the surface is sound and prime with Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eEpoxy Damp Proof Membranes\u003c\/h4\u003e \u003cp\u003ePrime with 1 neat coat of ROCATEX Ultimate Grip Primer.\u003c\/p\u003e \u003ch4\u003eUnderfloor Heating\u003c\/h4\u003e \u003cp\u003eSwitch off existing systems at least 3 days before tiling.\u003c\/p\u003e \u003cp\u003eAfter installation, wait 1 week before restarting the system and gradually increase temperature by 5°C per day.\u003c\/p\u003e \u003cp\u003eFor new electric underfloor heating systems, use a suitable self-levelling compound before tiling.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eMixing\u003c\/h3\u003e \u003cp\u003eMix 20kg of ROCATEX C2TE S1 Semi-Rapid Flex Grey with 4.8–5 litres of clean cold water.\u003c\/p\u003e \u003cp\u003eUse a slow-speed drill and whisk attachment to achieve a smooth, creamy consistency.\u003c\/p\u003e \u003cp\u003eMix thoroughly for a minimum of 2 minutes.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eApplication\u003c\/h3\u003e \u003cp\u003eApply adhesive to the prepared substrate and comb using a suitable notched trowel.\u003c\/p\u003e \u003cp\u003ePress tiles firmly into place using a twisting and sliding motion to ensure full contact.\u003c\/p\u003e \u003cp\u003eFor floors, wet areas, external installations, granite, and quartz, solid bed fixing is essential.\u003c\/p\u003e \u003cp\u003eBack-butter tiles where necessary to eliminate voids beneath the tile.\u003c\/p\u003e \u003cp\u003eExpansion joints must comply with BS 5385.\u003c\/p\u003e \u003cp\u003eCheck adhesive open time by touching the adhesive bed:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIf adhesive transfers to the finger, bonding is acceptable\u003c\/li\u003e \u003cli\u003eIf not, remove and replace with fresh adhesive\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDo not add additional water or powder once setting has begun.\u003c\/p\u003e \u003cp\u003eDo not apply:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBelow 5°C\u003c\/li\u003e \u003cli\u003eAbove 25°C\u003c\/li\u003e \u003cli\u003eIn direct sunlight\u003c\/li\u003e \u003cli\u003eDuring wet or frosty conditions\u003c\/li\u003e \u003cli\u003eOnto hot substrates\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eGrouting\u003c\/h3\u003e \u003cp\u003eAllow a minimum of 3 hours before grouting or light foot traffic.\u003c\/p\u003e \u003cp\u003eSwimming pools should not be filled for at least 3 weeks after grouting.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003eOne 20kg bag covers approximately 6m² at 3mm bed thickness.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore unopened, clear of the ground, in a cool, dry, frost-free environment.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eAlways follow the Material Safety Data Sheet.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eContains Portland Cement\u003c\/li\u003e \u003cli\u003eMay cause skin irritation and serious eye damage\u003c\/li\u003e \u003cli\u003eContains Chromium (VI), which may cause allergic reactions\u003c\/li\u003e \u003cli\u003eWear gloves, eye protection, face protection, and suitable clothing\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf contact with eyes occurs, rinse immediately with water and seek medical advice.\u003c\/p\u003e \u003ch3\u003eDeclared Performance\u003c\/h3\u003e \u003cp\u003e \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z4fcn\/product_images\/uploaded_images\/moved-bfe56e95eff319f948b7308670c98c69.png\" alt=\"Rocatex C2TE S1 Semi-Rapid Flex Grey Adhesive Performance Data\"\u003e \u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848378556803,"sku":"TLTA-05-2014","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-05-2014_IMAGE__86665.1655473299.1280.1280.jpg?v=1776783353"},{"product_id":"fast-set-flexible-tile-adhesive-20kg-grey","title":"Fast Set Flexible Tile Adhesive - 20Kg - Grey","description":"\u003ch3\u003eRapid Setaflex\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFlexible, Rapid Setting Floor \u0026amp; Wall Tile Adhesive\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eTilemaster Rapid Setaflex is a polymer-modified, flexible, rapid-setting cement-based tile adhesive designed for both wall and floor applications.\u003c\/p\u003e \u003cp\u003eFormulated with increased adhesion and reduced slip properties, it is suitable for fixing a wide range of tile types including ceramic, porcelain, and natural stone.\u003c\/p\u003e \u003cp\u003eIts flexible formulation makes it ideal for substrates subject to limited movement or vibration, including timber overlays and underfloor heating systems.\u003c\/p\u003e \u003cp\u003eThe rapid-setting properties allow for light foot traffic and grouting after just 3 hours.\u003c\/p\u003e \u003cp\u003eSuitable for prolonged wet conditions including swimming pools, Rapid Setaflex can be used internally and externally and is frost resistant once set.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eProduct Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approximately 5.5m² per 20kg bag at 3mm solid bed application\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e 20kg\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eKey Advantages\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGenuine S1 flexibility for a wide range of substrates\u003c\/li\u003e \u003cli\u003eSuitable for ceramic, porcelain, and natural stone tiles\u003c\/li\u003e \u003cli\u003eIdeal for use with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for wet areas including swimming pools\u003c\/li\u003e \u003cli\u003eAvailable in white and grey\u003c\/li\u003e \u003cli\u003eSuitable for 3mm–12mm bed depths\u003c\/li\u003e \u003cli\u003eReady for light foot traffic and grouting after 3 hours\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eSuitable Tile Types\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCeramic\u003c\/li\u003e \u003cli\u003ePorcelain\u003c\/li\u003e \u003cli\u003eNatural stone\u003c\/li\u003e \u003cli\u003eTerracotta\u003c\/li\u003e \u003cli\u003eQuarry tiles\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eSuitable Substrates\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTile backer boards\u003c\/li\u003e \u003cli\u003eSand \u0026amp; cement screeds\u003c\/li\u003e \u003cli\u003ePlasterboard\u003c\/li\u003e \u003cli\u003ePlaster\u003c\/li\u003e \u003cli\u003ePlywood overlay (Class 3 flooring grade)\u003c\/li\u003e \u003cli\u003eFlooring grade asphalt\u003c\/li\u003e \u003cli\u003eExisting vinyl tiles\u003c\/li\u003e \u003cli\u003eExisting ceramic, porcelain, and natural stone tiles\u003c\/li\u003e \u003cli\u003eEpoxy DPM\u003c\/li\u003e \u003cli\u003eConcrete brick and block\u003c\/li\u003e \u003cli\u003eConcrete\u003c\/li\u003e \u003cli\u003eCement render\u003c\/li\u003e \u003cli\u003eCalcium sulphate screeds\u003c\/li\u003e \u003c\/ul\u003e","brand":"Tilemaster Adhesives","offers":[{"title":"Default Title","offer_id":57848774787459,"sku":"FSFAG","price":26.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/Main-RapidSetaflex__03787.1673610181.1280.1280.jpg?v=1776785063"},{"product_id":"fast-set-flexible-tile-adhesive-20kg-white","title":"Fast Set Flexible Tile Adhesive - 20Kg - White","description":"\u003ch3\u003eRapid Setaflex\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFlexible, Rapid Setting Floor \u0026amp; Wall Tile Adhesive\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eTilemaster Rapid Setaflex is a polymer-modified, flexible, rapid-setting cement-based floor and wall tile adhesive with enhanced adhesion and reduced slip properties.\u003c\/p\u003e \u003cp\u003eSpecially formulated for fixing a wide range of tiles including ceramic, porcelain, and natural stone, it is suitable for substrates subject to limited movement or vibration, such as timber overlays and underfloor heating systems.\u003c\/p\u003e \u003cp\u003eIts rapid-setting properties allow for light foot traffic and grouting after just 3 hours.\u003c\/p\u003e \u003cp\u003eTilemaster Rapid Setaflex is ideal for areas exposed to prolonged or permanent wet conditions, including swimming pools. Suitable for both internal and external use, it is frost-resistant once cured.\u003c\/p\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cp\u003e20kg covers approximately 5.5m² using a 3mm solid bed application.\u003c\/p\u003e \u003ch3\u003ePack Size\u003c\/h3\u003e \u003cp\u003e20kg\u003c\/p\u003e \u003ch3\u003eColour\u003c\/h3\u003e \u003cp\u003eWhite\u003c\/p\u003e \u003ch3\u003eAdvantages\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGenuine S1 flexibility for use on a wide range of substrates\u003c\/li\u003e \u003cli\u003eSuitable for ceramic, porcelain, and natural stone tiles\u003c\/li\u003e \u003cli\u003eIdeal for use with underfloor heating systems\u003c\/li\u003e \u003cli\u003eSuitable for wet areas, including swimming pools\u003c\/li\u003e \u003cli\u003eAvailable in white and grey\u003c\/li\u003e \u003cli\u003eSuitable for 3mm – 12mm bed depths\u003c\/li\u003e \u003cli\u003eWalk on and grout after approximately 3 hours\u003c\/li\u003e \u003cli\u003eSuitable for internal and external applications\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSuitable Tile Types\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCeramic\u003c\/li\u003e \u003cli\u003ePorcelain\u003c\/li\u003e \u003cli\u003eNatural stone\u003c\/li\u003e \u003cli\u003eTerracotta\u003c\/li\u003e \u003cli\u003eQuarry tiles\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSuitable Surfaces \u0026amp; Substrates\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTile backer boards\u003c\/li\u003e \u003cli\u003eSand and cement screeds\u003c\/li\u003e \u003cli\u003ePlasterboard\u003c\/li\u003e \u003cli\u003ePlaster\u003c\/li\u003e \u003cli\u003ePlywood overlay (Class 3 flooring grade)\u003c\/li\u003e \u003cli\u003eFlooring grade asphalt\u003c\/li\u003e \u003cli\u003eExisting vinyl tiles\u003c\/li\u003e \u003cli\u003eExisting ceramic, porcelain, and natural stone tiles\u003c\/li\u003e \u003cli\u003eEpoxy DPM\u003c\/li\u003e \u003cli\u003eConcrete brick\/block\u003c\/li\u003e \u003cli\u003eConcrete\u003c\/li\u003e \u003cli\u003eCement render\u003c\/li\u003e \u003cli\u003eCalcium sulphate screeds\u003c\/li\u003e \u003c\/ul\u003e","brand":"Tilemaster Adhesives","offers":[{"title":"Default Title","offer_id":57848792449411,"sku":"FSFAW","price":26.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/Main-RapidSetaflex__03787.1673610181.1280.1280__39393.1673611514.1280.1280.jpg?v=1776785137"},{"product_id":"kelmore-moreflex-semi-rapid-s1-20kg-grey","title":"Kelmore MoreFlex Semi Rapid S1 - 20kg - Grey","description":"\u003cp\u003eA semi-rapid setting, S1 flexible, cementitious, wall and floor tile adhesive.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eKelmore’s MoreFlex Semi-Rapid S1 is a highly polymer modified, flexible, semi-rapid setting, cementitious tile adhesive for walls and floors. This deformable adhesive has excellent bond strength and flexibility ensuring numerous types of tiles, such as porcelain, ceramic, and natural stone can be confidently fixed to a wide range of backgrounds, including underfloor heating systems and those subject to limited movement and vibration. Allowing bed depths up to 15mm, MoreFlex Semi-Rapid S1 has a pot life of 2 hours, an open time of 30 minutes and is set and ready for grouting after 6 hours – making it the perfect choice for projects when the working and set times of rapid and standard setting products don’t meet your requirements. MoreFlex Semi-Rapid S1 is suitable for interior and exterior use, as well as in wet areas, including swimming pools, and it is particularly recommended for fixing large format tiles.\u003c\/p\u003e","brand":"Kelmore","offers":[{"title":"Default Title","offer_id":57848802574723,"sku":"MOREFLEXSEMIRAPIDS1","price":19.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/MoreFlex-Semi-Rapid-S1__72189.1724246786.1280.1280.png?v=1776785299"},{"product_id":"kelmore-megaflex-rapid-s2-20kg-grey","title":"Kelmore MegaFlex Rapid S2 - 20kg - Grey","description":"\u003cp\u003eA rapid setting, S2 flexible, cementitious, wall and floor tile adhesive.\u003c\/p\u003e\u003cp\u003eKelmore’s MegaFlex Rapid S2 is a highly polymer modified, extremely flexible, rapid setting, cementitious tile adhesive for walls and floors. This highly deformable adhesive has excellent bond strength and flexibility ensuring numerous types of tiles, such as porcelain, ceramic, and natural stone can be confidently fixed to a wide range of backgrounds, including underfloor heating systems and those subject to limited movement and vibration. Allowing bed depths up to 15mm, MegaFlex Rapid S2 has a pot life of 45 minutes, an open time of 25 minutes and is set and ready for grouting after 3 hours. This truly versatile, high performance adhesive can be used on green cementitious screeds and concrete, in wet areas, including swimming pools, and for interior and exterior applications.\u003c\/p\u003e","brand":"Kelmore","offers":[{"title":"Default Title","offer_id":57848802673027,"sku":"MEGAFLEXRAPIDS2","price":27.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/Megaflex-Rapid-S2__29856.1724247037.1280.1280.png?v=1776785301"},{"product_id":"kelmore-moreflex-rapid-s1-tile-adhesive-20kg-grey","title":"Kelmore MoreFlex Rapid S1 Tile Adhesive - 20Kg (Grey)","description":"\u003ch2\u003eKelmore MoreFlex Rapid S1 Tile Adhesive\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eMoreFlex Rapid S1\u003c\/strong\u003e is a rapid-setting, S1 flexible cement-based tile adhesive suitable for both wall and floor applications.\u003c\/p\u003e\n\n\u003cp\u003eHighly polymer modified for enhanced bond strength and flexibility, it is ideal for fixing porcelain, ceramic, and natural stone tiles.\u003c\/p\u003e\n\n\u003cp\u003eThis deformable adhesive is designed for use on a wide range of substrates, including surfaces subject to limited movement or vibration, delivering a durable and reliable installation.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePerformance \u0026amp; Application\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBed depth:\u003c\/strong\u003e up to 15mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePot life:\u003c\/strong\u003e 45 minutes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e 25 minutes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSet time:\u003c\/strong\u003e ready for grouting after 3 hours\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e smooth and slump-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSuitable for both interior and exterior applications, including wet environments such as swimming pools.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eTechnical Documentation\u003c\/h3\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003e\n    \u003ca href=\"https:\/\/kelmore.co.uk\/wp-content\/uploads\/2026\/03\/MoreFlex-Rapid-S1.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\n      Download Technical Data Sheet\n    \u003c\/a\u003e\n  \u003c\/strong\u003e\n\u003c\/p\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003e\n    \u003ca href=\"https:\/\/kelmore.co.uk\/wp-content\/uploads\/2024\/01\/MoreFlex-Rapid-S1-White-SDS.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\n      Download Health \u0026amp; Safety Data Sheet\n    \u003c\/a\u003e\n  \u003c\/strong\u003e\n\u003c\/p\u003e\n","brand":"Kelmore","offers":[{"title":"Default Title","offer_id":57848911069571,"sku":"TILEADHESIVE","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/MoreFlex-Rapid-S1__49807__46317.1774428172.1280.1280.png?v=1776785972"}],"url":"https:\/\/www.tilefixstore.co.uk\/collections\/tile-adhesives.oembed","provider":"TileFix Store","version":"1.0","type":"link"}