{"product_id":"rocatex-c10-ultimate-sealer-1-litre","title":"ROCATEX C10 ULTIMATE SEALER - 1 LITRE","description":"\u003ch3\u003eRocatex C10 Ultimate Sealer - 1 Litre\u003c\/h3\u003e \u003cp\u003eROCATEX C10 Ultimate Sealer is a high-performance, VOC-free, water-based impregnating sealer designed to provide long-lasting invisible protection against stains, dirt, mould, and limescale.\u003c\/p\u003e \u003cp\u003eSuitable for polished and unpolished natural stone, grout joints, paving, concrete, brick, and render.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuitable for polished and unpolished natural stone\u003c\/li\u003e \u003cli\u003eAlso suitable for grout, paving, concrete, brick, and render\u003c\/li\u003e \u003cli\u003eExcellent stain and dirt protection\u003c\/li\u003e \u003cli\u003eHelps protect against mould and limescale\u003c\/li\u003e \u003cli\u003eEasy application – only 1–2 coats required\u003c\/li\u003e \u003cli\u003eInvisible finish that does not alter surface appearance\u003c\/li\u003e \u003cli\u003eHighly water and oil repellent\u003c\/li\u003e \u003cli\u003eLong-lasting protection\u003c\/li\u003e \u003cli\u003eSuitable for interior and exterior use\u003c\/li\u003e \u003cli\u003eIdeal for domestic and commercial applications\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDeveloped using advanced fluorochemical technology, ROCATEX C10 Ultimate Sealer penetrates porous surfaces to create a breathable, non-film-forming protective barrier.\u003c\/p\u003e \u003cp\u003eIt provides excellent resistance to water, grease, oil, staining, and everyday dirt while maintaining the natural appearance of the treated surface.\u003c\/p\u003e \u003ch3\u003eDirections for Use\u003c\/h3\u003e \u003cp\u003eShake well before use.\u003c\/p\u003e \u003cp\u003eEnsure the surface is clean, dry, and free from dirt, grime, cement residues, and grout haze before application.\u003c\/p\u003e \u003cp\u003eIf required, first clean the surface using a diluted solution of ROCATEX Tile \u0026amp; Stone Renovator (1:10 dilution), rinse thoroughly, and allow to dry completely.\u003c\/p\u003e \u003cp\u003eFactory-applied sealers or waxes on porcelain surfaces must be removed before sealing.\u003c\/p\u003e \u003cp\u003eApply generously using a sponge, brush, roller, paint pad, spray applicator, or ROCATEX Sealer Applicator.\u003c\/p\u003e \u003cp\u003eRemove excess sealer after 15–30 minutes.\u003c\/p\u003e \u003cp\u003eA second coat is recommended after approximately 1 hour to ensure complete coverage. Again, remove any excess after 15–30 minutes.\u003c\/p\u003e \u003cp\u003eTreated surfaces are typically dry enough for light foot traffic after approximately 1 hour but require up to 72 hours to achieve full stain resistance.\u003c\/p\u003e \u003cp\u003eDuring curing:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDo not cover the surface\u003c\/li\u003e \u003cli\u003eWipe up spills immediately\u003c\/li\u003e \u003cli\u003eDo not apply with underfloor heating switched on\u003c\/li\u003e \u003cli\u003eDo not apply in direct sunlight or above 25°C\u003c\/li\u003e \u003cli\u003eDo not allow excess residue to dry on the surface\u003c\/li\u003e \u003cli\u003eDo not grout until at least 4 hours after sealing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTo test sealing effectiveness, place a teaspoon of water on the treated surface for 15 minutes. If the water absorbs into the surface, an additional coat is required.\u003c\/p\u003e \u003cp\u003eAlways test on an inconspicuous area before full application.\u003c\/p\u003e \u003ch3\u003eCoverage\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHigh porosity surfaces:\u003c\/strong\u003e Approximately 7.5m² per litre, per coat\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eLow porosity surfaces:\u003c\/strong\u003e Approximately 15m² per litre, per coat\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePolished surfaces:\u003c\/strong\u003e Approximately 30m² per litre, per coat\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eGrout joints:\u003c\/strong\u003e Approximately 1000 linear metres per litre, per coat\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eMaintenance\u003c\/h3\u003e \u003cp\u003eRegularly sweep floors and clean surfaces using ROCATEX Tile \u0026amp; Stone Cleaner.\u003c\/p\u003e \u003ch3\u003eStorage\u003c\/h3\u003e \u003cp\u003eStore in a cool, dry, frost-free environment between +5°C and +25°C.\u003c\/p\u003e \u003cp\u003eUnopened containers have a shelf life of up to 2 years.\u003c\/p\u003e \u003ch3\u003eHealth \u0026amp; Safety\u003c\/h3\u003e \u003cp\u003eContains: 2-Methylisothiazol-3(2H)-one.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMay cause an allergic skin reaction\u003c\/li\u003e \u003cli\u003eKeep out of reach of children\u003c\/li\u003e \u003cli\u003eWear suitable gloves, protective clothing, and eye protection\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIf on skin:\u003c\/strong\u003e Wash thoroughly with soap and water. If irritation or rash occurs, seek medical advice.\u003c\/p\u003e","brand":"Rocatex","offers":[{"title":"Default Title","offer_id":57848377508227,"sku":"TLTA-20-2004","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0945\/6628\/5699\/files\/TLTA-20-2004_C10_Sealer_IMAGE__50197.1655470618.1280.1280.jpg?v=1776783348","url":"https:\/\/www.tilefixstore.co.uk\/products\/rocatex-c10-ultimate-sealer-1-litre","provider":"TileFix Store","version":"1.0","type":"link"}