Product Description
Rocatex Grout & Cement Remover - 1 Litre
A rapid-action cleaning solution designed to remove cement residues, grout stains, efflorescence, and similar deposits from a wide range of surfaces.
- Ceramic & porcelain tiles
- Slate & natural stone
- Terracotta & quarry tiles
- Brick & paving
- Removes cement stains
- Effective limescale remover
- Efflorescence remover
- Suitable for interior & exterior use
ROCATEX Grout & Cement Remover is suitable for use on glazed and unglazed ceramics, slate, quarry tiles, brick, terracotta, and stone surfaces. It can be used diluted or undiluted depending on the severity of the residue.
Directions for Use
Mild Residue & Absorbent Tiles
Dilute 1 part ROCATEX Grout & Cement Remover with 4 parts warm water. Apply using a cloth or sponge and wipe thoroughly with a clean damp cloth.
Moderate Residue
Dilute 1 part ROCATEX Grout & Cement Remover with 1 part warm water. Apply generously across the tile surface. Agitate with a scrubbing brush if required and leave for 5–10 minutes, keeping the surface wet with additional solution if necessary. Rinse thoroughly with clean water.
Heavy Residue
Use undiluted and agitate with a scrubbing brush or mechanical scrubber if required. Thoroughly neutralise the treated surface with clean water after use.
Please Note
- Always test on a small inconspicuous area before full application
- Avoid prolonged contact with grout joints
- Neutralise all treated surfaces with clean water after use
- Do not use on acid-sensitive surfaces such as stainless steel, chrome, enamel, marble, or limestone unless fully understood and tested
- In high humidity conditions, vapours may react with acid-sensitive materials
- Any accidental contamination should be rinsed immediately with plenty of clean water
Coverage
Approximately 5–25m² per litre depending on dilution and surface condition.
Storage
Store in a cool, dry, frost-free environment.
Health & Safety
Contains: Hydrochloric acid.